Identificador: 1635
Abierta
ID de articulo : # 1635 se ha agregado a su lista de deseos.
.jpg)
.jpg)
Descripción
PARTE: 1AM - EXTRACTOR -VENTILADOR INDUSTRIAL TIPO TAMBOR
DOS TAMAÑOS:
VP-30: Aspa de 30″ de diámetro
VP-42: Aspa de 42″ de diámetro
Características principales:
*2 velocidades
*Potente flujo de aire
*30″ y 42″ de diámetro de aspa
*Enchufe con borne de protección a tierra
*127 volts
*Llantas de plástico
*Contiene 2 agarraderas, una en cada extremidad, para fácil movilidad
Usos:
*Ideales para usarse en talleres, bodegas y espacios exteriores.
|
Modelo
|
Potencia
WATTS
|
Volumen
Velocidad Baja/ Alta
PCM MC/HR |
|
|
VP-30 |
375 |
4,006 / 4,829 |
6,807 / 8,204 |
|
VP-42 |
750 |
4,938 / 5,682 |
8,390 / 9,654 |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA DE BANCO - 14 PULGADAS
PARTE: 2CK-TA12Is for serious woodworkers and production shops that require an industrial strength and powerful table saw. The large precision-ground & polished cast-iron table and cast-iron saw unit ensure vibration free cutting with optimum cut quality. The quick setting T-square rip fence is equipped with dual inch & metric scales for precise rip cutting. The blade guard is mounted to a splitter with anti-kickback pawls for safe operation. Comes standard with both standard and dado arbors...
AMXmachinery1
DOBLADORA DE METAL 5' X 12GA
DOBLADORA DE METAL 5' X 12GA PARTE: 2GM-0512EThis machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is po...
AMXmachinery1
TALADRO MULTIPLE EN LINEA
TALADRO MULTIPLE EN LINEA 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precision ...
AMXmachinery1
ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORA
PARTE: 2TA-WG-2404HC - ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORAFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting ...