Identificador: 226
Abierta
ID de articulo : # 226 se ha agregado a su lista de deseos.
.png)
.png)
Descripción
PARTE # 2AM-360 - LIJADORA DE CANTOS
Motor: 1.5 HP Direct Driven
Voltage:
361: 115 or 208-240/1/50-60
362: 208-240/1 or 3/50-60
364: 460/3/50-60
Variable Speed: AC Inverter 400-1800 rpm
Arbor: 1” Dia. by 4” Tall
Vertical Adjustment: YES
Horizontal Adjustment: YES
Wheel Tilt: 60o Forward; 40o Back
Fence: Standard
Table Height: 36 inches
Table Size: 36” by 33”
Floor Space: 33” by 33”
Weight: 375 lbs.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TORNO COPIADOR – RANURADOR – CAPACIDAD 30” LARGO
PARTE:
2TA-CL-330S - TORNO COPIADOR – RANURADOR – CAPACIDAD 30” LARGO
Nuevo con garantíaFeatures:
Suitable for cutting straight and spiral
grooves for the straight shaped or tapered spindle.
The machine employs rotary air cylinder
incorporating with gear for accurate indexing of grooves.
The cutter carriage's forward and backward
movements are hydraulically operated with feed speed control providing a
smooth motion and stable cutting performance.
T...
AMXmachinery
PARTE: AMX-10131 - EXTRACTOR DE TUBO - ASPAS 12” DIAMETRO - MOTOR 1/2 HP - CINCINNATI FAN
PARTE: AMX-10131 - EXTRACTOR DE TUBO - ASPAS 12”
DIAMETRO - MOTOR 1/2 HP - CINCINNATI FAN
USADO - BUENAS CONDICIONES
MOTOR 1/2 HP, 280/440V, 3 FASES
MEDIDAS: 12” DIAMETRO INTERIOR X
14” DIAMETRO EXTERIOR X 20” FONDO
HECHO EN USA
6,500.00 MXN
AMXmachinery
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTA
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...
AMXmachinery
PARTE: 2NT-NTCS24L – SIERRA TRONZADORA – DISCO 24” – MOTOR 15 HP
PARTE: 2NT-NTCS24L – SIERRA TRONZADORA – DISCO 24” – MOTOR 15 HP – IZQUIERDA – LEFTPARTE: 2NT-NTCS24R – SIERRA TRONZADORA – DISCO 24” – MOTOR 15 HP – DERECHA – RIGHT - OPCIONALNueva con garantía CARACTERISTICASCapacidad máxima de corte: 2" x 21", 4" x 19", 6" x 15", 8" x 8"15 HP motor, 3PH 230V with 24V magnetic controls24” Carbide tipped blade included1” Saw arbor diameterCycle operation: PneumaticQuick access on front of the machine to adjust blade stroke.Safety ...