Identificador: 224
Abierta
ID de articulo : # 224 se ha agregado a su lista de deseos.
Descripción
PARTE # 2TA-SD-602T - LIJADORA DE MOLDURAS – 2 ARRIBA
PARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 1 LADO
PARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 2 LADOS
Nueva con garantia
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring-load pressure rolls at top, without sliding for irregual surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
SPECIFICATIONS |
|
Max. Sanding Width | 6" |
Max. Sanding Height | 4" |
Min. Sanding Length | 13" |
Wheel Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts (universal Heads Only) | 90° ~ 180° |
Max. Sanding Wheel Dia. (Top & Bottom) | 12" |
Max. Sanding Wheel Dia. (Side) | 8" |
Sanding Spindle Dia (top & Bottom) | 1-1/4" |
Sanding Spindle Dia. (Side Head) | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Simple Belt Head |
|
Sanding Belt Size | 6" x 20" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SOLDADORA DE SIERRA CINTAS - 20 – 60 mm
PARTE # 4VF-VC6 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 20 – 60 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm
AMXmachinery
REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 12” - REGRESADORA
PARTE:
2FA-RE6X12 - REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 12”
NUEVA CON GARANTIA
The widest cutting resaw
available in our line of products.
If your looking for a low cost
solution to cutting up to 12" wide material, look no further.
These saws are equipped with
20HP motors and 10" wide conveyor belts.
Standard Features
Air Tensioned Blade System
Enclosed Hydraulic System
Easy Height Adjustment
Machine Specs
Dimensions
Length: 84"
...
AMXmachinery
PARTE: 12305 - CABEZALES PARA MOLDURADORA - 1-13/16” FLECHA X 6” DIAMETRO X 2.25” - 3”, 4”, 5”, 6” LARGOS
PARTE: 12305 - CABEZALES PARA MOLDURADORA - 1-13/16” FLECHA X 6” DIAMETRO X 2.25” - 3”, 4”, 5”, 6” LARGOS
USADOS - MUY BUENAS CONDICIONES
North American
Gladu hydro-lock
6 alas
20 grados
Diámetro interior - Flecha 1-13/16 - si quita el buje 2-1/8"
Diámetro exterior: 6” (150 mm)
Largos:Largo 2-1/4” (57 mm) – existencia – 11 piezas Largo 3” (75 mm) – existencia – 4 piezasLargo 4” (102 mm) – existencia – 4 piezasLargo...
AMXmachinery
PARTE: 2CA-BR-25NUR/BR-25MILL - TALADRO HORIZONTAL CON O SIN CABEZAL MULTIPLE
PARTE: 2CA-BR-25NUR/BR-25MILL - TALADRO HORIZONTAL CON O SIN CABEZAL MULTIPLESpecifications2CA-BR-25KNUR / MILLMotor Standard2 HPSpindle Speed2900 RPMKnuring / Milling Cutter headsOptional by Customer request / DesignStroke Distance0~3" (0~80 mm)Table Size11.4" x 11.2" (290 x 285 mm)Machine Size with Stand42" x 19" x 42" (1067 x 483 x 1067 mm)Machine Size W/O Stand40" x 15" x 28" (1016 x 381 x 711 mm)Packing Size44" x 21" x 44" (1118 x 521 x 1118 mm)N. W.331 LBS (150 kg)G. W.375 LBS (170 kg)The...