Identificador: 1742
Abierta
ID de articulo : # 1742 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-GT610HI
Is capable of speeds up to 98 feet per minute and its robust cast-iron body & industrial cardan drive system ensure high production planing day in and day out. The large diameter cutterheads are spiral type with two-sided solid carbide inserts which produce a clean finish with superior stock removal capacity. The spring loaded feed system passes the material over the bottom head allowing it to act like a jointer to flatten the board prior and then a sectional infeed roller feeds the material through the top head for accurate dimensioning.
- Powerful 40HP top head motor and 30HP bottom head motor for maximum stock removal
- Full cardan shaft feed system allowing for faster feed speeds up to 98 FPM
- Planing capacity up to 24” wide and 8” thick
- Pin type carpet feed system passes the material over the bottom head to ensure a flat surface
- (7) bed rollers including (3) driven rolls for superior feed speeds
- Spiral insert knife cutterheads with 6 rows of two-sided 30x12x2.5mm solid carbide insert knives provide superior stock removal, reduced machine load and noise, and optimum finish quality
KEY ADVANTAGES
- Cast iron machine frame for superior vibration damping resulting in a long machine & bearing life
- Chrome-plated tables and top and bottom for maximum wear resistance
- Cutterheads are mounted in precision ABEC 7 RHP bearings
- Feed system uses a spring-loaded pin arrangement to pass material over the bottom jointing head.
- Sectional serrated infeed roll before the top cutterhead
- Variable feed speed by frequency inverter (VFD) with digital display for the feed speed
- Digital thickness control for quickly and precisely setting the desired thickness
- Upper assembly is adjusted for desired thickness by four large diameter cylindrical postsAdjustable infeed bed by easily
- accessible handwheel to set desired stock removal on the bottom head
- Easy to access swivel control panel with individual ammeters for load monitoring and hour meter to aid in maintenance planning
- Cutterhead starters are Y-Delta providing soft start to the heads for reduced power consumption on startup
- Automatic lubrication to the conveyor feed system
- High quality Schneider electrical components to CSA/UL standard
|
|
INCH
|
METRIC
|
|
Max. working width |
24” |
610mm |
|
Max. working thickness |
8” |
200mm |
|
Min. working thickness |
5/16″ |
8mm |
|
Min. working length |
12” |
300mm |
|
Cutterhead RPM |
5000 RPM |
|
|
Cutterhead diameter |
5.3” |
135mm |
|
Feed speed |
30-98 FPM |
10 – 30 m/min |
|
Top cutterhead motor |
40 HP |
|
|
Bottom cutterhead motor |
30 HP |
|
|
Feed motor |
5 HP |
|
|
Table Rolls |
7 (3) driven |
|
|
Opening hoist motor |
1 HP |
|
|
Machine weight |
8800 lbs |
4000 kgs |
|
Machine dimensions (LxWxH) |
112” x 67” x 67” |
2830x1700x1700mm |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
TORNO 16'' X 40''
TORNO 14'' X 40'' PARTE: 2GM-GML-1440HDThe 14" x 40" Gap Bed Lathe with SINO DRO is the best machine money can buy. Fully equipped with a Taper Attachment, 8” 3-jaw chuck with one set reversible jaws, 10” 4-jaw chuck, 12” Face plate, 5 1/2” large steady rest with roller jaws, 2” follow rest, 4-way tools post, Foot brake Coolant system, and so much more list. ISO 9001 certifiedLarge spindle bore 2-1/16”Heavy Duty spindle D1-6One-piece so...
AMXmachinery1
TRANSPORTADOR DE MATERIAL - MOTORIZADO AZ
PARTE: 2CK-AZ - TRANSPORTADOR DE MATERIAL - MOTORIZADO
Belt Width
BW
12″
15.75″
19.7″
23.6″
27.5″
31.4″
Machine Width
FW
13.4″
17.3″
21.25″
25.2″
29″
33″
Std. Material
Width (max.)
PW
9″
13″
17″
21″
24...
AMXmachinery1
SIERRA DE VAIVEN - 200 MM
PARTE: 2CK-FR-200 - SIERRA DE VAIVENFEED ROLLS & PRESSURE ROLLSBottom Rolls – 7 pieces in Front Section & 5 pieces in Rear SectionTop Front section is equipped with 7 pressure rollers & 3 air cylinders controlled by sensorTop Rear section is equipped with 5 pressure rollers & 1 air cylinder controlled by sensor
Motor
20 HP +1/2 HP + 5kW(Servo) + 2HP
Blower
Max.
Working Thickness
200 mm
Min.
Working Thickness
...
AMXmachinery1
TORNO 26 X 80''
TORNO 26 X 80'' PARTE: 2GM-268026” x 80”, 4-1/8” bore, 10HPISO 9001 certifiedLarge spindle bore 4-1/8”Heavy Duty spindle D1-8Heavy Duty guideway width 16”Heavy Duty main motor 10HP4-Way Rapid Traverse16 spindle speeds from 25-1,600 rpm, 16 speeds54 kinds of inch threads, and 54 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced, hardened and precision groundSpindle is supported at 3-point by h...