Identificador: 163
Abierta
ID de articulo : # 163 se ha agregado a su lista de deseos.
Descripción
PARTE: 2TA-CM-100 - 3YC-YOM-120 - ESCOPLO OSCILANTE - 2 MESAS - AMX MACHINERY
Nueva con garantia
- A faster rectangular mortise machine provides variable oscillating speed at 7 ~ 200 strokes per minute.
- Two working tables built in both side of the machine to double the production for high efficiency mortising operation.
- Pneumatic hold down clamps and pneumatic depth movement for smooth finish.
- Fully automatic mortise produce cycles simply by stepping on the foot pedal.
- Hydraulic pistons for drilling depth speed control, enable for best results.
- Width and depth of mortising is easily adjustable.
- Table can be tilted 20 degrees at each side for angular slot.
- Powerful industrial motor for maximum cutting capacity.
- Precision sealed long-life bearing.
- Heavy cast iron frames and table for durability usage.
SPECIFICATIONS | SET-100 | CM-100 |
Max. Width of Tenon (Mortise) | 4" | 4" |
Max. Depth of Tenon (Mortise) | 2" | 2-3/8" |
Oscillation Rate | 13 ~ 80 PCS/MIN. | 7 ~ 200 STROKE/MIN. |
Table Tilts | 20° | 20° |
Spindle Drive Motor | 3 HP | 3 HP |
Cutter Feed Motor | 1 HP | ½ HP |
Cutter Speed | 9500 RPM | 9500 RPM |
Table Vertical Adjustment | 3" | 3" |
Max. Thickness | 4" | 4" |
Max. Stoke Width | 5" | 4" |
Air Pressure | 80 PSI | 80 PSI |
Machine Size | 63" x 51" x 51" | 51" x 47" x 47" |
N.W. | 2200 LBS | 1540 LBS |
G.W. | 2640 LBS | 1880 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12563 - TORNO COPIADOR ASIMETRICO - GENNARI - 4 ESTACIONES
PARTE: 12563 - TORNO COPIADOR ASIMETRICO - GENNARI - 4
ESTACIONES
USADO - BUENAS CONDICIONES
MOTOR:
5.5 HP, 220/380V, 60 HZ, 3400 RPM
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)
AMXmachinery
RESACADORA DOBLE – 48” CAPACIDAD LARGO
PARTE: 2FA-2NX-48 – RESACADORA DOBLE
– 48” CAPACIDAD LARGO
NUEVA CON GARANTIA
HASTA 4,000 RESAQUES/HRStandard FeaturesAdjustable
Notch up to 3"Variable
SpeedAlmost Unlimited Capacity Machine
SpecsDimensionsLength:
Model Dimensions 24"Width:
73"Height:
56"Infeed
Height: 40" PowerCutter
Head Motors: 20HP 208/230/480/3/60 TEFCInfeed
Motor:1-1/2 HP 208/230/480/3/60 TEFCVFD:
For lnfeed Motor Variable SpeedCompletely
Pre-Wired Motor Starter with Start/Stop Buttons and Circu...
AMXmachinery
MOLDURADORA 4 CABEZALES
PARTE # 32QD-MB4013GH - MOLDURADORA 4 CABEZALES - 20-130 MM ANCHOPARTE # 32QD-MB4016GH - MOLDURADORA 4 CABEZALES - 20-160 MM ANCHOPARTE # 32QD-MB4018GH - MOLDURADORA 4 CABEZALES - 20-180 MM ANCHOPARTE # 32QD-MB4023GH - MOLDURADORA 4 CABEZALES - 20-230 MM ANCHOFEATURESModel32QD-MB4013GH32QD-MB4016GH32QD-MB4018GH32QD-MB4023GHPlaning width20-130mm20-160mm20-180mm20-230mmPlaning thickness10-100mm10-100mm10-100mm10-100mmFeeding speed10-30m/min10-30m/min10-30m/min10-30m/minSpindle speed6000rpm6000rpm6...