Identificador: 2026
Abierta
Descripción
PARTE: 12417 - SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
USADA – MUY BUENAS CONDICIONES
3 HP TEFC Dual Voltage Motors
Wired for 460 Volt, 3 Phase
Start and E-Stop buttons
Left head fixed, Right head manually position via hand crank
Minimum Cut Length @ 90 = 13”
Maximum cut length @ 90 = 100”
Both heads rotate inward 90 to 45 degree
Both heads tilt outward to 45 degree for compound
Two hand anti tie down cycle control on pedestal
Built in 3rd party hydro-check
Pneumatic filter/regulator
Pneumatic flow control for head operation
Pre-arranged for horizontal and vertical clamps with footpedal
2 @ 12” Carbide tipped saw blades
SIKO electronic digital readout with magnetic encoder
Two center work supports
Very Good condition, cleaned and checked
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA MULTINAVAJA - WINTERSTEIGER
MU-RG-011505 - SIERRA MULTINAVAJA - WINTERSTEIGER "DSG 150 ECO"USADA – EN BUENAS CONDICIONES460 V, 60 Cy, 3 Ph.MFG 2002
AMXmachinery
PARTE: 2EB-DK2 - ASTILLADOR A GASOLINA – 14 HP – MAX DIAMETRO 6.25”
PARTE:
2EB-DK2 - ASTILLADOR A GASOLINA – 14 HP – MAX DIAMETRO 6.25”
NUEVA CON GARANTIAFeatures
dual swing chutes, 13-inch cutting blades, DOT road-legal tires, and a 36-inch
extended axle. The load chute is pickup truck height and the engine is covered
by a Commercial Command Pro 3-Year Kohler warranty.The
14 HP Kohler Commercial engine has an RPM of 3,600, and the dual 13-inch
cutting blades auto-adjust to pulverize brush and up to 6.25-inch diameter
trees. For increased longevi...
AMXmachinery
ASTILLADORA DE MADERA - 35 HP - ABERTURA SUPERIOR 39.4” X 49.2”
PARTE: 2WE-WL8 - ASTILLADORA DE MADERA - 35 HP - ABERTURA
SUPERIOR 39.4” X 49.2”NUEVA CON GARANTIA
APLICACION: ASTILLAR MADERA Y BRIQUETEAR
MATERIAL: MADERAS SUAVES, PINO PONDEROSA
VOLUMEN REQUERIDO: 500-1000 kg/hr
CAPACIDAD PRODUCCION: 700-900 lbs/hr (300-400 kg/hr)
ALIMENTACION: SUPERIOR
DESCARGA:
FONDO ABIERTO
PESO
APROXIMADO: 4,400 lbs (2,000 kg)
ENERGIA: 35 HP (26.4 kW), 460 V / 60 Hz / 3 FASES
-
Hopper Opening: 39.4" x 49.2" (1,000 mm x 1,250 mm)
...
AMXmachinery
2KA-JTB-50 - DOBLADORA DE TUBO HIDRAULICA – CAPACIDAD 2”
PARTE: 2KA-JTB-50 - DOBLADORA DE TUBO HIDRAULICA – CAPACIDAD 2”Nueva con garantíaFeaturesStandard dies: 1〞,1-1/4〞,1-1/2〞,1-7/8〞Wall thickness: 0.04〞-0.19〞Hydraulic power drive, PLC ControlBending workpieces such as low carbon round tubes, stainless round tubes, square tubes, and round steel bars to achieve desired shapes.The equipment features "one-touch" operation on a single workpiece and data-program controlled mass processing.Easy to operate, reasonable in composition, and l...