Identificador: 1632
Abierta
Descripción
PARTE: 1AM - EXTRACTOR - CAMPANAS DE EXTRACCION PARA COCINA
-FABRICADAS EN ACERO INOX. P3, GRADO ALIMENTICIO
- PARTE FRONTAL, LATERALES, TECHO Y FILTROS EN LAMINA CAL. 20 CON GOTERÓN EN LAMINA CAL. 18
- SOPORTA FILTROS Y RESPALDO EN LAMINA GALVANIZADA
- INCLUYE FILTROS TIPO LABERINTO - INCLUYE CAPELOS PARA ILUMINACIÓN
- NO INCLUYE DUCTERÍA NI EXTRACTOR
|
Cantidad de
Capelos
|
Largo
|
|
1 |
1 m |
|
2 |
1.5 m |
|
2 |
2 m |
|
2 |
2.5 m |
|
2 |
3 m |
|
3 |
3.5 m |
|
3 |
4 m |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...
AMXmachinery1
PARTE: 2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEK
PARTE:
2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEKHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much material is removed. The final thickness is keyed in the digital control and the top head & feed assembly...
AMXmachinery1
TRANSPORTADOR DE MATERIAL - MOTORIZADO AW
PARTE: 2CK-AW - TRANSPORTADOR DE MATERIAL - MOTORIZADO
Belt Width
BW
12″
15.75″
19.7″
23.6″
27.5″
31.4″
Machine Width
FW
13.4″
17.3″
21.25″
25.2″
29″
33″
Std. Material
Width (max.)
PW
9″
13″
17″
21″
24...
AMXmachinery1
CANTEADORA AUTOMATICA
CANTEADORA AUTOMATICA PARTE: 2CK-MX350Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments all...