ID: 1708
Open
Description
PARTE: 2CK-MX340M
Is an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry the MX340M can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.
- Compact design makes it the ideal edgebanding solution for small workshops
- Precise adjustments for optimum edge quality
- Chain feed system ensures consistent feeding of material for consistent results
- Available in 230V 1 or 3 phase
- PLC control system with LED display and keypad
- Workpiece is fed by chain
- Edge coil support plate: Ø 800 mm (31.5″), for PVC/ABS
- Automatic edge feeding with a thickness capacity of 0.4-3 mm; strip material up to 4mm can be hand-fed
- Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
- 2 kg (2.64 lb) Teflon-coated hot-melt glue pot
- Spring loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber)
- Heavy duty pressure beam with extendable work-piece support
- Heated infeed fence for pre-heating the panel for optimum glue penetration
- Mechanical digital readouts for convenient and quick adjustment to the working units & thickness
END TRIM
8800 RPM dual saw blade (80mm / 3.15″) end trimming unit
TOP & BOTTOM TRIM
10500 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
RADIUS SCRAPING
Radius scraper with 2mm radius knives can be easily excluded when not required
BUFFING
2800 RPM top & bottom buffing units to polish the machined edge
|
|
INCH |
METRIC |
|
Feeding speed |
23 FPM |
7 m/min |
|
Panel Thickness |
0.472” – 1.77” |
12 - 45 mm |
|
Edge thickness |
0.0158”– 0.118” |
0.4 – 3 mm |
|
Minimum panel size |
4 ¾” x 4 ¾” |
120 x 120 mm |
|
Working table size |
33.5” |
850 mm |
|
Dust collection outlet diameter |
2” x 4” |
2 x 100 mm |
|
Total connected power |
5 HP |
3.8 KW |
|
Air |
7.06 CFM / 85 – 100 PSI |
200 litres/min /6 – 7 kg/cm² |
|
Max. machine dimensions (LxWxH) |
115” x 47” x 48” |
2921 x 1194 x 1220 mm |
|
Machine weight |
968 lbs |
440 kgs |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
COLECTOR DE POLVOS - 5HP
COLECTOR DE POLVOS - 5HP - 2CK-UFO103BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop. HP generating 2863 CFMBase is mounted on casters s...
AMXmachinery1
FINGER JOINT SEMI AUTOMATICA
FINGER JOINT SEMI AUTOMATICA PARTE: 2CK-FL14Represents a state-of-the-art finger jointing production line, meticulously crafted to transform extra short wood waste into valuable materials, all the while upholding an exceptional balance between performance and cost-effectiveness. Its compact design with multiple automatic features and options makes it an ideal solution for a small sized finger jointing operation. By utilizing a solitary shaper setup, this system delivers extraordinary v...
AMXmachinery1
SIERRA ESCUADRADORA - 1 EJE
PARTE: 2CK-D405ANCIs the ideal sliding panel saw for high accuracy cutting of sheet materials for the production of kitchen cabinetry, furniture, millwork operations, and more. The NC rip fence provides the operator with the added convenience of setting the rip width automatically through an eye level control. This saves time while providing a high level of accuracy and repeatability. The 10’ sliding table is made from a precision aluminum extrusion and runs on precision linear guide rai...
AMXmachinery1
PARTE: 2TA-GS-12C46M - ENGOMADORA DE TRANSPORTADOR - 12" ANCHO
PARTE: 2TA-GS-12C46M - ENGOMADORA DE TRANSPORTADOR - 12"
ANCHONueva con garantía4’ infeed, 6’ outfeed for easy gluing applicator setup.Grooved rubber roller for water-based wood working glue spreader.Removable stainless steel conveyor belt, glue pan, doctor blade and glue roll assembly for quick and easy clean-up.Use the adjustable stainless steel doctor blade to adjust the glue spread thickness.The glue applicator and conveyor are driven by industrial 1/2 HP total enclosure motor.All comp...