Identificador: 2597
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
DOBLADORA DE METAL 8' X 10 GA PARTE: 2GM-0810E
- Taiwan machines
- All (3) rolls are hardened rolls, up to 50-52 HRC
- 3-rollers are driven to perform high accuracy
- Adjustable cone attachment included
- 3/8”, ½” and 5/8” grooves on rollers
- One wheel one-side operated for bending roll
- One wheel one-site operated for pinch roll (E model is powered)
- Heavy duty casting frame
- Heavy duty all steel welded construction
- 1/3 of full length in middle of roller is straight, and two ends with crown to get perfect round performance.
- Quiet running operation
- Easy swing-out top roller
- Safety line all around the machine for emergency stop
- All rolls run forward and reverse
- Safety type forward/reverse foot pedal
- Power source 220V, (option: 440V, 3 phase)
- Adjustable cone attachment
- 3/8”, ½” and 5/8” grooves on rollers
- All (3) hardened rolls
- Removable safety foot pedal
- Operation & parts manual
- Orange color front cover is optional.
- E models come with motorized bending roll up/down w/ push button and digital display for easy operation of repeat jobs
Capacity: Mild Steel Stainless Steel soft aluminum min. thickness |
8'2" x 10Ga. 8'2" x 14Ga. 8'2" x 1/4" 26Ga.
|
|
|
| Roll Dia. | 6" |
| Min. Bending Dia. Inch | 8" |
| Pre-bend inch | 0.12" |
| Rolls Speed ft/min | 17 |
| Rolls Opening | 1/2" |
| Main Motor | 4HP 3PH 220V or440V |
| Weight | 4,550 lbs. |
| Overal Dimensions | 132" x 35" x 56" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA - 15 PULGADAS
PARTE: 2CK-C14RSIs a single-blade ripsaw is geared towards the shop looking to increase efficiency in their ripping operations but cannot justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C14RS can produce a glue joint finish ready for panel glue-up right out of the saw.Produces a guaranteed glue joint finish to 15′, which eliminates the need to joint the material after rippingPrecision straight line feeding for parallel a...
AMXmachinery1
PARTE: 2BE-BEL – COLECTORES DE POLVOS – MODULARES
PARTE: 2BE-BEL – COLECTORES DE POLVOS – MODULARESNuevos con garantía 5 HP - BEL50XL - 230/460V7.5 HP - BEL75XL - 230/460V10 HP - BEL100XL - 230/460V15 HP - BEL150XL - 230/460V20 HP - BEL200XL - 230V - 460V PODEROSAS, BAJO EN RUIDO, SISTEMAS PARA INTERIORES DE COLECCION DE ASERRIN
Ranging
from 5 HP to 20 HP, it offers high efficiency and a full range of features. Designed in compliance with NFPA.
Optimized for maxim...
AMXmachinery1
TALADRO MULTIPLE EN LINEA
TALADRO MULTIPLE EN LINEA 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precision ...
AMXmachinery1
ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORA
PARTE: 2TA-WG-2404HC - ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORAFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting ...