Identificador: 126
Abierta
Descripción
2EX-XP124T – CEPILLO 24” ANCHO – MOTOR 15 HP – TITAN – CABEZAL HELICOIDAL
2EX-XP124T – CEPILLO 26” ANCHO – MOTOR 20 HP – TITAN – CABEZAL HELICOIDAL
Nuevo con garantía
Cabezal Helicoidal VECTOR
Features:
VECTOR or straight knife cutter heads
11-3/4” thickness capacity
High Horsepowers: 20 HP & 15 HP
6000 RPM cutterhead
Powered top and bottom bed rollers
Motorized table elevation
Digital thickness controller
Solid cast-iron construction
Triple v-belts
Sectional chipbreakers
Externally adjustable front and rear bed rollers
Sound deadening enclosure
Available 208-230V or 460V
Powered top and bottom feed rollers
| 2EX-XP124T | 2EX-XP-126T |
Width | 24" | 26" |
Main HP | 15 HP | 20 HP |
Feed HP | 1 HP | 1 HP |
Elevation HP | 0.5 HP | 0.5 HP |
Max Thickness | 11.75" | 11.75" |
Min Thickness | 0.375" | 0.375" |
Max Cut | 0.375" | 0.375" |
Min Lenght | 10.5" | 10.5" |
Cutterhead RPM | 6000 | 6000 |
Feed Speed | 20-75 ft/min | 20-75 ft/min |
CFM Requirements | 1100 | 1100 |
Thickness Adjustment | PLC Controller | PLC Controller |
Bed Roller Adjustment | External | External |
Powered Bed Rollers | Top and Bottom | Top and Bottom |
Amps (230V / 460V) | 40A / 20A | 52A / 26A |
Weight | 2500 lbs | 2675 lbs |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESCOPLO OSCILANTE – 2 MESAS GEMELAS - HEMLA
PARTE: 12056 – ESCOPLO OSCILANTE – 2 MESAS GEMELAS - HEMLAUSADA – EN BUENAS CONDICIONES
AMXmachinery
PARTE: 12512 – BASTONERA – HAWKER 2000
PARTE: 12512 – BASTONERA – HAWKER 2000
USADA – BUENAS CONDICIONES
Rodillos de alimentación
Navajas
Mangas
Afiladora
AMXmachinery
PARTE: 12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO
PARTE:
12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO
SIN
COMPACTADORA
USADO EN BUENAS CONDICIONESDESIGNED TO SHRED
CORRUGATED SHEETS AND BOXES, OVERSIZED FLAP CUTS AND DIE PRESS WASTE TO SMALL IRREGULAR PIECES...APPROXIMATELY 5" X 8" PIECES. BOTTOM DISCHARGE
OUTLET FEEDS SHREDDED MATERIALS INTO CHUTES BINS, COMPACTORS, OR PNEUMATIC
SCRAP HANDLING SYSTEMS. IT HAS THE CAPACITY TO HANDLE 300 POUNDS PER HOUR PER
HORSEPOWER WHEN HANDLING CORRUGATED BOARD MATERIALS.
AMXmachinery
COMPRESOR DE TORNILLO - 50 HP - INGERSOL RAND
PARTE: 12340 - COMPRESOR DE TORNILLO - 50 HP - INGERSOL
RAND
USADO - BUENAS CONDICIONESAir cooled6211 hours