Identificador: 1718
Abierta
Descripción
PARTE: 12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO
SIN COMPACTADORA
USADO EN BUENAS CONDICIONES
DESIGNED TO SHRED CORRUGATED SHEETS AND BOXES, OVERSIZED FLAP CUTS AND DIE PRESS WASTE TO SMALL IRREGULAR PIECES...APPROXIMATELY 5" X 8" PIECES. BOTTOM DISCHARGE OUTLET FEEDS SHREDDED MATERIALS INTO CHUTES BINS, COMPACTORS, OR PNEUMATIC SCRAP HANDLING SYSTEMS. IT HAS THE CAPACITY TO HANDLE 300 POUNDS PER HOUR PER HORSEPOWER WHEN HANDLING CORRUGATED BOARD MATERIALS.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12594 - TRITURADORA - BLOAPCO - MODELO 7-9
PARTE: 12594 - TRITURADORA - BLOAPCO - MODELO 7-9USADO – BUENAS CONDICIONES – SIN USAR
AMXmachinery
PARTE: 12584 - TALADRO MULTIPLE – RITTER R246
PARTE: 12584 - TALADRO MULTIPLE – RITTER R246USADO - MUY BUENAS CONDICIONES(2) Bottom vertical drill heads, each with (23) gear driven spindles on 32 mm centers (24 RH and 22 LH rotation), (2) 3 HP motors, 3,450 RPM spindle speed. Row & boring head spacing adjustable from 5" - 24" with mechanical digital readout, pneumatic cylinder drill head advance, 0" - 1-1/2" adjustable stroke and 3-position turret depth control. Equipped with: (4) Overhead adjustable pneumatic holddowns on each head, 72...
AMXmachinery
OVER ARM ROUTER
PARTE # 2EV-2480 - OVER ARM ROUTER - EVANS 2480 - 220 Volt, 3 Phase, 10 amp- Standard Features:- 3 HP High frequency router motor- 80 PSI Required- 18,000 RPM- Working height 33"- Includes router bit Part # 08018- 30" x 48" cutting area- Crated weight 1500 LBS. Shipping dimensions 69” long X 72” wide X 65” highOptional:- 440 Volt, 3 Ph. 5 amp, 80 PSI
AMXmachinery
MOLDURADORA – 5 CABEZALES - WEINIG PROFIMAT
PARTE: 12163 - MOLDURADORA – 5 CABEZALES - WEINIG
PROFIMAT
USADA – MUY BUENAS CONDICIONES
Spindle diameter
1-1/2″
5-head (B-R-L-T-B)
working capacity 9-1/16″ x 4-11/16″
Spindle sequence:
Bottom 10HP, Right/left 15HP, Top 15HP, and Bottom 10HP
Mechanical digital
readouts
Variable speed 20-78
FPM
Powered by 4 HP
motor
Full sound enclosure
Receding chip maker
and pressure element at top spindle, in feed straightening table