Identificador: 81
Abierta
ID de articulo : # 81 se ha agregado a su lista de deseos.
Descripción
PARTE # EV-4270 - LAMINATE RACK - EVANS 4270
Pneumatic Laminate Rack
- 100 PSI Required
- Max 80 sheets 5’ X 12’ standard grade laminate.
- Dual level storage area
- Crated weight 1640 LBS. Shipping dimensions 81” long X 60” wide X 82” high
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1SL-DC-TS12 - SIERRA DE MESA 12" - MOTOR 3 HP
PARTE:
1SL-DC-TS12 - SIERRA DE MESA 12" - MOTOR 3 HPMOTOR: 3 HP, 110/220V, 60 Hz, 1 FASESMEDIDAS DE LA MESA CON EXTENSION: 27" X 40-1/2"ALTURA MESA: 34-1/2"DIAMETRO DEL DISCO 12"DIAMETRO FLECHA 5/8"VELOCIDAD DEL DISCO: 4560 RPMRANGO ELEVACION DISCO: 0 A 4"RANGO INCLINACION DISCO: 0 A 45 GRADOSCAPACIDAD MAXIMA DE CORTE A 90 GRADOS: 4"CAPACIDAD MAXIMA DE CORTE A 45 GRADOS: 2-3/4"PESO: 127 KGS
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190Para hacer dobles para Back Splash- 110V, 1 phase, 15 amps- 220V, 1 phase, 8 amps- Air: 80 PSI - 12' maximum capacity (3660 mm)- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm) - Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)- Crated weight 1800 LBS. - Shipping dimensions 182” long X 34” wide X 50” high- Bends inside cove bends for back splashes. The 0190 is available with either...
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 95 LITROS
PARTE: 2PG-W18 – HORNO PARA
CERAMICA, VIDRIO, METALES – 95 LITROS220V, 1 Fase, 4840 Watts, 22 AmpsMedidas interiores: 457 mm ancho x 457 mm fondo x 457 mm altoVolumen interior: 95.43 litrosMax. Temperatura: 926 grados centígradosNuevo con garantíaMade of durable insulating firebrick. The digital controller saves time, makes casting more reliable, and gives consistently repeatable results. The 12-key Sentry controller has 3 built-in, easy-to-use programs. You can also enter your own progra...
AMXmachinery
PARTE: 12526 - CENTRO DE TRABAJO CNC - ROVER GOLD 1232
PARTE: 12526 - CENTRO
DE TRABAJO CNC - ROVER GOLD 1232
USADO - MUY BUENAS CONDICIONESNumerically
controlled machining centre ROVER GOLD 1232
Working fields: X = 3.280 mm; Y = 1.260 mm; (electrospindle axis)
Z Clearance = 180 mm with H=74 mm modules – Z Stroke = 364 mm
WORKING TABLE
6
ATS panel supports - L = 1240 mm - 18 sliding bases for vacuum
6
back stops of 115 mm stroke and 26 mm height spacers
...