Identificador: 430
Abierta
ID de articulo : # 430 se ha agregado a su lista de deseos.
Descripción
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICA
Nueva con garantia
- Bends up to 2"schedule 40 pipe (1.54")
- Dies available in 120 and 240 degrees
- Dies and all Pins are heat treated
- Bronze bushings at Pivot Points
- Capabilities greater than benders costing 3 times as much
- High quality components and cosntruction
Tube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degrees
Pipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degrees
Weight: 110 lbs ( 50 kg) only includes3 sets dies
Comes with (3) free dies: 1”, 1-1/2” and 1-3/4” with 120 degree for tubing
Optional Packages of dies available:
Package 1 for round tubing: part # PKG1-HTB2:
¾” x 3” radius, 240 degree or 120 degree
7/8” x 3” radius , 240 degree or 120 degree
1” x 3” radius , 240 degree or 120 degree
1 ¼” x 4” radius , 240 degree or 120 degree
1 ½” x 5” radius, 240 degree or 120 degree
Package 2 for round tubing: part # PKG2-HTB2:
¾” x 3” radius, 240 degree or 120 degree
7/8” x 3” radius , 240 degree or 120 degree
1” x 3” radius , 240 degree or 120 degree
1 ¼” x 4” radius , 240 degree or 120 degree
1 ½” x 5” radius, 240 degree or 120 degree
2” x 6” radius, 240 degree or 120 degree
Package 3 for round tubing: part # PKG3-HTB2:
1” x 3” radius , 240 degree or 120 degree
1 ¼” x 4” radius , 240 degree or 120 degree
1 ½” x 5” radius, 240 degree or 120 degree
1 5/8” x 5” radius , 240 degree or 120 degree
1 ¾” x 6” radius, 240 degree or 120 degree
Package 4 for round pipe: part # PKG4-HBT2:
¾” x 3” radius, 240 degree or 120 degree
1” x 4” radius , 240 degree or 120 degree
1 ¼” x 5” radius, 240 degree or 120 degree
1 ½” x 6” radius , 240 degree or 120 degree
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
OVER ARM ROUTER
PARTE # 2EV-2480 - OVER ARM ROUTER - EVANS 2480 - 220 Volt, 3 Phase, 10 amp- Standard Features:- 3 HP High frequency router motor- 80 PSI Required- 18,000 RPM- Working height 33"- Includes router bit Part # 08018- 30" x 48" cutting area- Crated weight 1500 LBS. Shipping dimensions 69” long X 72” wide X 65” highOptional:- 440 Volt, 3 Ph. 5 amp, 80 PSI
AMXmachinery
LIJADORA DE TAMBOR – 2 TAMBORES – CAP. ANCHO 26”
PARTE:
1SIL-DC-DS26 – LIJADORA DE TAMBOR – 2 TAMBORES – CAP. ANCHO 26”
Nueva con garantía
Rodillos 26”
Ancho Máximo De Lijado: 25-1/2"
Tipo De Empaque: 1 Caja
Peso De La Máquina: 220 kg
Motor Del Tambor De Lija: 3 HP, 220V, 60Hz, 2 fases
Motor De La Cinta De Alimentación: 1/6 HP
Altura Máxima De Lijado: 12-1/4"
Cantidad De Rodillos: 2 de 5" x 26"
Velocidad De La Cinta :
1-6mts/min
2 Tomas De Aspiración De: 4"
AMXmachinery
MESA DESLIZABLE PARA TROMPOS
PARTE # 2BF-SK-28902 - MESA DESLIZABLE PARA TROMPOSLARGO DE VIAJE: 1250 MM (49-1/2")LARGO DEL RIEL: 1590 MM (62-1/2")
AMXmachinery
CEPILLO 4 CARAS – 16” ANCHO - MIDA
PARTE:
12283 – CEPILLO 4 CARAS – 16” ANCHO - MIDA
USADO –
MUY BUENAS CONDICIONESYear 2002Motor Power 37,4 kWVoltage 400 V (three-phase)C.E. YesAbres 4Largueur min/max. Travail 420
mmHauteur min/max. Travail 11 -
300 mmLongueur table travail 1000 mmTotal Nº axis 4Bottom horizontal axis Yes 11
kWDrill right axis Yes 6,6 kWDrill left axis Yes 6,6 kWUpper horizontal axis Yes 13,2
kWVitesse d avance 3-30 m/minDiametre rouleaux avancement
90 mmDrag upper number 3Transmission Type Ca...