Identificador: 286
Abierta
ID de articulo : # 286 se ha agregado a su lista de deseos.
.jpg)
Descripción
PARTE: 2TA-BS-1212HR-TN - REASERRADORA HORIZONTAL - 2 SIERRAS
PARTE: 2TA-BS-1616HR-TN - REASERRADORA HORIZONTAL - 2 SIERRAS
NUEVA CON GARANTIA
| Specifications | BS-1212HR-TN | BS-1616HR-TN |
|---|---|---|
| Max. Cutting Capacity | 12" x 12" | 16" x 16" |
| Distance between Blade to Conveyor | 1/4" ~ 12" | |
| Saw Wheel Diameter | 28" x 2 | |
| Saw Blade Length (Width) | 201" (2") | 201" (2" ~ 3") |
| Saw Blade Speed | 6000 FPM | |
| Feed Conveyor Width | 12" | 16" |
| Feed Speed (Variable) | 0 ~ 90 FPM | |
| Main Motor (Each Head) | 20 HP x 2 | 30 HP x 2 |
| Saw Blade Lift Motor | 1/2 HP | |
| Feed Conveyor Motor | 3 HP | |
| Dust Hood | 4" x 6 | |
| N. W. | 7200 LBS | 8600 LBS |
- Machine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.
- It is equipped with a digital controller for convenient and accurate thickness setting.
- The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
- When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.
- Variable feed speed is controlled by a frequency inverter for best cutting requested.
- The infeed and outfeed pressure rollers are easily raised or lowered by a gear rack.
- The infeed and outfeed pressure rollers are spring loaded and easily adjusted for the horizontal or vertical direction to suit various workpiece thicknesses.
- Blade tension is adjusted by means of a hand wheel.
- A tension scale allows the operator to correctly adjusted the tension for different blade thickness.
- The cast iron saw blade wheel are dynamically balance for smooth running.
- Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change.
- The roller type return conveyor equipped at left side of the machine provides easily repetitive cutting.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-12491 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 12” - DAYTON
PARTE: AMX-12491 - EXTRACTOR DE TUBO - DIAMETRO
INTERNO 12” - DAYTONUSADO - MUY BUENAS CONDICIONESBALEROS MOTOR NUEVOSMedidas totales: 22” ancho x 15”
fondo x 12” altoDiámetro aspas: 12”Marca DaytonModelo: 4C659A
Motor: ¼ HP,
1725 RPM, 115/230V, 4.6/2.3 Amp, 1 faseVideo: https://vimeo.com/870515251
AMXmachinery
COMPRESOR PISTON - MOTOR 7.5 HP
PARTE: 1SL-DC-7.5H500 – COMPRESOR DE PISTON HORIZONTAL – MOTOR 7.5 HP – 500 LTSNUEVO CON GARANTIACompresor de 7.5 HP Horizontal Tanque: 500 Litros Cabezal Marca FIAC en Línea Con guarda bandas Base en fierro colado, Cabezal en Aluminio y Cilindro en fierro colado. DESPLAZAMIENTO: 30 CFM, 23 ACFM EFICIENCIA VOLUMETRICA 77% PRESIÓN MÁXIMA: 175 PSIG, 12 BAR Tiempo de llenado 5' 08", 1280 RPM Nivel sonoro 78 MOTOR 7.5HP, 5.5 KW, 120V, 3PH, 60HZ Conexión de des...
AMXmachinery
LIJADORA DE BANDA Y DISCO DE BANCO
PARTE: 2AR-97181 - LIJADORA DE BANDA Y DISCO 3.5 AMPSAC Volts: 120Accessories Included: Miter gauge, sanding belt and sanding discAmperage (amps): 3.5Belt width: 4 in.Diameter: 6 in.Horsepower (hp): 3/4Speed (max): 1819 RPM (disc) / 1185 FPM (belt)Product Weight: 27 lb.Shipping Weight: 28.80 lb.Table tilt (deg): 60°
AMXmachinery
PARTE: AMX-10129 - EXTRACTOR DE TUBO - ASPAS 18” DIAMETRO - MOTOR ½ HP - CINCINNATI FAN
PARTE: AMX-10129 - EXTRACTOR DE TUBO - ASPAS 18”
DIAMETRO - MOTOR ½ HP - CINCINNATI FAN
USADO - BUENAS CONDICIONES
MOTOR 1/2 HP, 280/440V, 3 FASES
MEDIDAS: 18” DIAMETRO INTERIOR X 20”
DIAMETRO EXTERIOR X 20” FONDO
MODELO: 1863T3/4
HECHO EN USA
6,500.00 MXN