Identificador: 271
Abierta
ID de articulo : # 271 se ha agregado a su lista de deseos.
Descripción
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KW
New with warranty
For mass productions, 2 to 3 minute per cycle for drying or bending the wood project
Varieties of wood bending shapes are able to produce.
Press one large part, slicing into many small pieces for high productivity.
Meet all kinds of furniture fabrications.
One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.
Using wooden mold instead of expensive steel mold to save development cost dramatically
Use electricity power instead of steam boiler, no influence to the environment without emissions of PM2.5.
High frequency wave penetrate into inside of glue, shorten glue cured period and forming time.
One work is able to operate 4 to 6 bending press machines.
Model: PT-13HF-GN
In Put Power: 20 KVA
Out Put Power: 13 KW
Machine Size (L x W X H): 47" x 28" x 39"
Machine Weight: 820 LBS
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12461-3 - EXTRACTOR CENTRIFUGO - DE AIRE - DE COCINA INDUSTRIAL – ALUMINIO
PARTE: 12461-3 - EXTRACTOR CENTRIFUGO - DE AIRE - DE
COCINA INDUSTRIAL – ALUMINIO
USADO – MUY BUENAS CONDICIONES
MARCA: DAYTON ELECTRIC
MODELO: 3C503
Base 28” X 28”
Diámetro total: 38”
Altura total: 30”
Motor 1.5 HP, 115/230V, 1 Fase, RPM
1,725, AMP 18/9, marca BALDORVideo con tapa superior: https://vimeo.com/889299894
Video sin tapa superior para mostrar
mecanismos: https://vimeo.com/889300003
AMXmachinery
PARTE: 2CA-RM150 - BASTONERA – CAPACIDAD 1” - 5” DIAMETRO
PARTE: 2CA-RM150 - BASTONERA -
CAPACIDAD 1” - 5” DIAMETRO
NUEVA CON GARANTIAThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board...
AMXmachinery
TROMPO – MOTOR 5 HP
PARTE:
2EX-ET-100 – TROMPO – MOTOR 5 HP – FLECHAS ¾ Y 1-1/4”
Nuevo con garantiaThe ET-100 is a powerful and
fully customizable machine at a reasonable price. With the optional sliding
fence and interchangeable spindles, this machine is a real asset to any shop.2 spindle speeds: 7,500 and
10,00 RPMInterchangeable spindlesReversableMagnetic startermicro adjustable fenceTable inserts for multiple
cutter diameterFront and side access panelsSpindle lockReplaceable hardwood infeed
an...
AMXmachinery
PARTE: 12542 - SIERRA MULTIPLE - 30 HP - GABBIANI
PARTE:
12542 - SIERRA MULTIPLE - 30 HP - GABBIANI
USADA - MUY BUENAS CONDICIONES
CAPACIDAD 300 MM
CADENA EN MUY BUENAS CONDICIONES