Identificador: 2309
Abierta
ID de articulo : # 2309 se ha agregado a su lista de deseos.
PARTE: 2QM-R-RCGS - ENGOMADORAS 1 Y 2 LADOS - ANCHO 24", 48" Y 63"
AMXmachinery
Descripción
PARTE: 2QM-R-RCGS-1-24-1.75 - ENGOMADORA - 1 LADO – ANCHO 24” - 1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-24-1.75 - ENGOMADORA - 2 LADOS – ANCHO 24” - 1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-48-1.75 - ENGOMADORA - 1 LADO – ANCHO 48” - 1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-48-1.75 - ENGOMADORA - 2 LADOS – ANCHO 48” - 1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-63-1.75 - ENGOMADORA - 1 LADO – ANCHO 63” - 1.75” ABERTURA
PARTE: 2QM-R-RCGS-1-63-1.75 - ENGOMADORA - 2 LADOS – ANCHO 63” - 1.75” ABERTURA
Nuevas con garantía
Opciones:
Guardas para Rodillos
Velocidad Variable (40-118 fpm)
Abertura 6” - $
Features:
• 1-sided (applies glue to 1 side [top side] of each panel) or 2- sided for 2-sided machine
• Working thickness: adjustable from 0 to 45mm (0 to 1.77"), adjustable via hand wheel
• Maximum material width: 630mm (24") or 1220mm (48”) wide or 1600mm (63”)
• Application rolls quantity: 1 or 2
• Application rolls material: SBR rubber, 60 durometer (Shore A)
• Application rolls diameter: 205mm (8") or 210mm (8.27”) for 48”, or 210mm (8.27”) for 63” wide
• Application rolls grooving: 20 grooves per inch
• Doctor rolls quantity: 1 or 2
• Doctor rolls material: Chrome-plated steel for 24” or NBR rubber, 98 durometer (Shore A) for 48” and 63” wide
• Doctor rolls diameter: 148mm (5.8") or 175mm (6.9”) for 48” and 63” wide
• Doctor rolls grooving: none (smooth rolls)
• Drive motor power: 1.5kw (2hp)
• Feed rate: fixed at 64fpm (optional: adjustable from 40 to 118 fpm)
• Includes emergency stop bars at front and back of machine
• Includes stainless steel waste glue drip pan
Note:
Electrical Requirements: 220v or 440v, 3-phase, 15 amps
The machine is designed to use water based PVA glue
For best glue for his application, your customer should consult his glue supplier (Franklin International, Wilsonart, etc.).
For countertops, we believe Wilsonart 3000 is quite popular
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PLANOS SECANTE MADERA
PARTE: AMX-PLANO-010- PLANOS SECANTE DE MADERA ASERRADA - 8,000 PT Construyalo usted mismo.Enviamos por email 1 archivo PDF con 15 a 20 hojas con fotos, planos, características, lista de materiales e instrucciones del secante de 8,000 pies tabla.Características del secante:Es secante e inmunizador.Desarmable.Se puede construir en diferentes capacidades.Utilizan como combustible: aserrín, recorte, capote o lena.El secante con los ahorros se paga de 2 a 3 anos aproximadamente.Despeja su patio ...
AMXmachinery
MOLDURADORA – 5 CABEZALES – 9” ANCHO – WEINIG
PARTE: 12252 – MOLDURADORA – 5 CABEZALES – 9”
ANCHO – WEINIG
USADA – BUENAS CONDICIONES
– LIMPIADA Y REVISADA
5-head machine
4-3/4" X 9-1/6" capacity
Spindle configuration: 7.5 HP bottom, 10 HP
shared between right and left spindle, 15 HP top, and 10 HP bottom
Spindle diameter: 1-1/2"
Variable speed feed 20 to 40 FPM
72" infeed straightening table
First feed wheel (before bottom spindle)
pneumatic up/down
Central adjustment of top spindle chipbreaker ...
AMXmachinery
LAMINATE SLITTER
PARTE # 2EV-5010 - LAMINATE SLITTER - EVANS 5010Laminate Slitter, 6" capacity- 110 Volt, 1 Ph., 1/3 HP,Standard Features:- 6" capacity- 70 feet per minute- 3-blade system for inlay quality cuts- Self-aligning fence- Crated weight 240 LBS. Shipping dimensions 37” long X 24” wide X 29” highOptional:- 220 Volt 50 Hz (export)