Identificador: 2214
Abierta
ID de articulo : # 2214 se ha agregado a su lista de deseos.
.jpg)
PARTE: 3HP-EMA-250 – CABECEADORA - CONTINUA - PARA TABLAS Y PISOS – 40-250 MM ANCHO
AMXmachinery
Descripción
PARTE: 3HP-EMA-250 – CABECEADORA - CONTINUA - PARA TABLAS Y PISOS – 40-250 MM ANCHO
ESCOPLO Y ESPIGA
Nuevo con garantía
Specification:
1.Max. / Min. Width: 250mm / 40mm
2.Max. / Min. Thickness: 10mm / 35mm
3.Min. Board Length: 270 mm
4.Max. Board Length: Unlimited
5.Max. Board Weight: 15kgs
6.Cutterhead Motors: 5-1/2HP x2 (Optional: 7-1/2HP x2 or 10HP x2)
7.Feeding Pressure Roller Motor: 1HP W/1HP Inverter
8.Infeed Conveyor Table Motor: 1/2HP (Optional: Variable Feed 1HP Inverter)
9.Cutterhead Feeding Motor (Forward & Backward): 1/2HP W/1HP Inverter
10.Cutterhead Spindle Diameter: Φ40mm
11.Max. cutter head dia.: 160mm
12.Cutterhead Type: TCT Disposable Inserts
(L): 14*14*2mm x 12pcs. 11.8*33.85mm x 4pcs.
(R): 14*14*2mm x 16pcs. 15*15*2.5mm x 8pcs. 11.8*33.85mm x 4pcs.
13.CutterHead Washer: 0.1 to 0.5, 1, 2, 5, 10, 20mm
14.Cutterhead Travel System: Mechanical Actuators
15.Feed Speed: 90M/min.
16.Processing Speed 24M/min. - Base on 2M Boards
17.Clamping: Clamps on Top and Side
18.Controls: Manual or Automatic
19.Air Service Unit: Norgren
20.Air Consumption: 12CFM
21.Dust Collection Hood: 6" x1
22.Max. RPM of Cutterhead Spindles: 7000RPM
23.Table to floor height: 950mm
24.Weight: 1100kgs
25.Packing Dimension with Pallet: 2300 x 1300 x 1600mm /1150kgs
26.With Motor In Feed Roller Table: 3300mm(L) & Foot Stand (3sets/unit)
Without Motor Out Feed Table: 2200mm(L) & Foot Stand (2sets/unit)
27.With CE Standard
28._______Volt,_______Hertz
OPTIONAL: In Feed Conveyor (One Section is 1100mm)
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10154 - EXTRACTOR DE TURBINA - 1.5 HP - DAYTON
PARTE: AMX-10154 - EXTRACTOR DE TURBINA - 1.5 HP -
DAYTON
USADO - MUY BUENAS CONDICIONES
MODELO: 4C329
MOTOR: 1.5 HP, 208/230/460/380V, 3
FASES
ENTRADA REDONDA: 7”
SALIDA RECTANGULAR: 4” X 5”
MEDIDAS TOTALES: 18” ANCHO X 16”
FONDO X 20” ALTO
AMXmachinery
PAR GUANTES
PARTE: 1SIL-R-SBC-41 - Par Guantes Repuesto para Cabinas de Sand Blast (arenado)
AMXmachinery
TALADRO MULTIPLE - 13 TALADROS – VERTICAL – MANUAL
PARTE
# RT-R113 – TALADRO MULTIPLE - 13 TALADROS – VERTICAL – MANUAL
Nueva con garantía
Fotos y Características:
3/4
HP Spindle Drive Motor, TEFC
60″
Back Fence Assembly
(1)
13-Vertical Gear Driven Spindle Rows
10mm
Bored Collets
(7)
Right Hand, (6) Left Hand
(2)
Index Pins
20″
X 48″ Work Table Surface
Wired
1-Phase 120 Volt, 60 Hz.
Manually
Actuated Boring Cycle
Tooling
Not Included
Crated
Dimensions: 45″ X 80″ X 44″ and 508...
AMXmachinery
SOLDADORA DE SIERRA CINTAS - 10 – 40 mm
PARTE # 4VF-VC4 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 10 – 40 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm