Identificador: 1869
Abierta
ID de articulo : # 1869 se ha agregado a su lista de deseos.
Descripción
PARTE: 12371 - SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
USADO - MUY BUENAS CONDICIONES
Make HPC
Year 1997
Phase 3 PHASE
Voltage 220 VOLT
Estimated Dimensions Foot print of line 52' x 15'
Estimated Weight 10,000 Lbs (approx)
DESCRIPTION:
HPC Double Sided Automatic finger joint line
Station 1 squares one end and cuts initial finger joint
Station 2 squares the other end, cuts finger joint, and applies glue.
Station 3 assembles and clamps the pieces
Station 4 cuts to length from 8' - 20'
The information provided was gathered from literature, internet & physical inspection.
It is thought to be accurate; but not guaranteed.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA CINTA 14"
PARTE # SIL-DC-MJ343B - SIERRA CINTA DE 14" - MOTOR 1 HPNUEVA CON GARANTIAMOTOR: 1 HP, 110/220V, 60 Hz, 1 FASEDISTANCIA DE CINTA A COLUMNA: 335 MM2 VELOCIDADES DE 12 Y 14 MTS/SEG)ALTURA MAXIMA DE CORTE: 160 MMTAMANO DE LA MESA: 19-1/2" X 16"INCLINACION DE LA MESA: 0 - 45 GRADOSALTURA DE LA MESA: 39"LONGITUD DE LA SIERRA CINTA: 2400 MMANCHO DE LA SIERRA CINTA: DESDE 1/4" HASTA 1/2"PESO: 85 KGSEMPAQUE: 1 CAJA
AMXmachinery
BASTONERA – MOTOR 20 HP – CAPACIDAD 1-1/4” – 3-1/4” DIAMETRO – HAWKER 350
PARTE: 12226 – BASTONERA – MOTOR 20
HP – CAPACIDAD 1-1/4” – 3-1/4” DIAMETRO – HAWKER 350
USADA – REVISADA Y CHECADA
(4)
knife
Adjustable
all steel cutter-head from 1-1/4″ to 3-1/4″ dia.
18″
min. length
Right
hand stock feed
Motor:
20HP
Feed
Motor: 2HP
Variable
feed speed
For operation on 230/460V, 3PH
AMXmachinery
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDO
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDOHS-0410M, 4’x10Ga., 24” manual back gauge & 60" squering arm, 7.5 hp, 220V, 3 PhHS-0410E, 4’x10Ga., 24” SIKO power back gauge & 60" squering arm, 7.5 hp, 220V, 3HS-0425M, 4’x1/4”, with 24” manual back gauge & 60" squering arm, 10 HP, 220V, 3HS-0425E, 4’x1/4” with 24” SIKO power back gauge & 60" squering arm, 10 HP, 220V, 3 HS-0625M, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" manual back gaugeHS-0625E, 6’x1/4”, 10 HP,...
AMXmachinery
REDUCTOR DE VELOCIDAD - 1 HP - 30.1
PARTE: AMX-10150 - REDUCTOR DE VELOCIDAD - 1 HP - 30.1
USADO - BUENAS CONDICIONES
MOTOR 1
HP, 208-230/460V, 3.6/3.6 AMP
MAX
OUTPUT TORQUE: 1260 LBS
GEAR
RATIO: 30.1
MAX INPUT
HP 1.5 AT 1750 RPM
TYPE: QC
US ELECTRICAL MOTORS
MEDIDAS: 17” LARGO X 9” FONDO X 9”
ALTO