Identificador: 1605
Abierta
ID de articulo : # 1605 se ha agregado a su lista de deseos.
SIERRA ESCUADRADORA VERTICAL - STANDARD - CAP. 168” X 66” X 3-1/8”
AMXmachinery
Descripción
PARTE: 2ST-STANDARD - SIERRA ESCUADRADORA VERTICAL - STANDARD - CAP. 169” X 66” X 3-1/8”
NUEVA CON GARANTIA
• Swiss made quality for accuracy and durability!
• Very stable, all welded steel frame suitable for free-standing or wall-mount installation
• Heavy-duty panel support rollers with integral foot pedal braking system
• Convenient, sturdy, two-section mid-shelf with moveable aluminum fingers allows comfortable working of small parts and ability to stage material on one side of the saw
• Snap-in aluminum small parts supports (pair) for stability of small parts cutting on mid-shelf
• Automatic, mechanically shifting aluminum support grid with replaceable plastic laths
• Full length measuring channel with inches/metric scales and measuring flip stop
• Second measuring channel with one auxiliary 4” wide flip stop
• Vertical cutting stations 40 inches on center (1 meter optional)
• TRK dust collection system with cable chain hose take-up; note: requires connection to a collector
• 7-1/2 hp, 220/440V, 3-phase motor with brake, Y- soft starter, and insulation to 77dB
• 300 mm (11-7/8”) HFG (hollow face) carbide saw blade
• Main blade, climb-cut scoring for chip-free cutting of melamine, veneers, and laminates
• Template bar with six stops for setting typical horizontal cuts
• Repeat rip device with roller follower and 5’ capacity for strip cutting from top of panel
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12539 - TRITURADORA - BLOAPCO - MODELO 3CAXS3036BV - 40 HP
PARTE: 12539 - TRITURADORA - BLOAPCO - MODELO 3CAXS3036BV
- 40 HP
USADO - BUENAS CONDICIONES
(3) Rotores 36" ancho
Abertura alimentación superior 30" x 36"
Motor
Baldor Reliance 40 HP, 3/60/ 230-460 V, 1775 RPM
Descarga inferior aproximada 28" x 28
AMXmachinery
ALIMENTADORA PANELES
PARTE # 2EV-8100 – STANDARD PANEL FEEDER – EVANS 8100Hydraulic 4 Corner Cable LiftTouch Screen ControlsLaser Height SensorNEMA 12 Enclosure460 Volt Fused Disconnect5 HP Hydraulic Power PackPanel Size: up to 5’x10’Panel Thickness: 3/8” to 1-1/2”Lift Capacity: 7000 poundsElectrical: 230/460 V, 3 PH, 60 Hz, 480 volt, 3 phase, 60 hzOptions:- Upgrade for 5’ x 10’ or 5’ x 12’ materials and increase lift capacity to 8000 pounds. (option 8200)- Upgrade for remote hand pendant control...
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2TA-DS-2500 - LIJADORA DE TAMBOR LOBO/CASTALY - 25" DE ANCHOPARTE # 2TA-DS-3700 - LIJADORA DE TAMBOR LOBO/CASTALY - 37" DE ANCHOCaracteristicas:- Easily operate with performance for sanding flat objects.- Heavy sheet metal cabinet stand.- Balanced cast aluminum sanding drums.- Two different grits and level sanding drums are designed for fast and fine finish at one pass.- First drum is cast aluminum; second drum is coated with rubber for fine sand paper.- Automatic feeding operates by non...