Identificador: 13
Abierta
ID de articulo : # 13 se ha agregado a su lista de deseos.
Descripción
PARTE: 2WA-BXTR6438F – ASTILLADORA – MOTOR GASOLINA 999CC, CAPACIDAD 6” DIAMETRO
6" Diameter Wood Chipper
999 CC Kohler Engine
Features:
Oversized chipping rotor
Reversible shipping blades
Adjustable Chute
Self feeding Hopper
Belt Drive
Centrifugal Clutch
Electric Start Engine
Highwat travel
Torflex suspension axles
DRIVE SYSTEM: | BELT DRIVE, CENTRIFUGAL CLUTCH | ENGINE: | 999 CC KOHLER CH 980 |
CHIPPER CAPACITY: | 6" DIA. (MAX. 12" SLAB) | CHIPPER HOUSING OPENING: | 6½" X 12" |
ROTOR SIZE: | 30" | NUMBER OF ROTOR KNIVES: | 2 |
KNIFE TYPE: | HARDENED TOOL STEEL | ROTOR WEIGHT: | 197 LBS. |
DIMENSIONS LXWXH: | 86"L X 75"W X 88"H | HOPPER OPENING: | 25" X 25" |
DISCHARGE HOOD ROTATION: | 360 DEGREES | DISCHARGE HOOD HEIGHT: | 88" |
RATED RPM: | 1280 | WEIGHT: | 1385 LBS |
TIRE SIZE: | 20.5 X 8 - 10 | TOOL BOX: | Built In |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
COMPRESOR DE TORNILLO - 50 HP - INGERSOLLRAND
PARTE: 12061 - COMPRESOR DE TORNILLO - 50 HP - INGERSOLLRANDMgf: 2006212 ACFM @ 125psiRemanufactured Airend with only 600 hours on it(95,000 Total Hours on unit)Annual PM performed 600 hours ago460 volt Aircooled Unit / Original Motor30-day Full Package Warranty
AMXmachinery
PARTE: 12571 - SIERRA MULTIPLE - MOTOR 30 HP - RAIMANN
PARTE:
12571 - SIERRA MULTIPLE - MOTOR 30 HP - RAIMANN
USADA - MUY BUENAS CONDICIONES
FLECHA LARGO: 23” CON RISCA
FLECHA DIAMETRO: 2.5”
DIAMETRO DISCOS: 12”
MFG: 2001
MOTOR 30 HP, 460V, 3 FASES, 60 HZ, 70 AMP - FALTA CONFIRMAR
LOS 30 HP
PESO MAQUINA: 2,000 KG
AMXmachinery
PARTE: 12109 - CABEZALES PARA MOLDURADORA – 40 MM FLECHA X 122 MM DIAMETRO X 100 MM LARGO
PARTE: 12109 - CABEZALES PARA MOLDURADORA – 40 MM FLECHA X 122 MM DIAMETRO X 100 MM LARGOUSADOS – EN BUENAS CONDICIONES20° ANGULO DE CORTEVARIOS EN EXISTENCIA
AMXmachinery
MOLDURADORA 5 CABEZAS WEINIG
PARTE # 11987 – MOLDURADORA WEINIG 23 - 5 CABEZALES5-HeadManual setupsCentral Lubrication SystemSpecificationsHead sequence: Bottom 7.5 KW (10hp), right & left by 11 KW(15hp) motor, top 11 KW (15 hp), bottom 7.5 KW (10hp)feed 5hp motor1½” Spindles 6,000rpm Cutterhead20-78 FPM Feed speed9-1/16″ x 4-11/16″ capDimensions: L 126″x W 77″x T 61″5,500lb