Identificador: 1093
Abierta
ID de articulo : # 1093 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 12154 – LIJADORA DE CEPILLOS – 53” ANCHO – 3 ESTACIONES - LOEWER
USADA – MUY BUENAS CONDICIONES
- 53" WORKING WIDHT - 3-STATION BRUSH SANDER
- 3 ROW DISC SANDING STATION, FOLLOWED BY 2 COUNTER ROTATING SPIRAL BRUSH ROLLERS AND A PLANETARY STATION
- DISC-STATION - 16 SANDING DISCS 250MM DIAMETER, EACH WITH 24 KEYWAYS 75MM LONG
- ROTATING ROLLER SPINDLES - 2 SPINDLES 90 DEGREE TO THE FEED, SPINDLE DIAMETER 50MM, FOR MAX, BRUSH DIAMETER 400MM
- PLANETARY STATION WITH 3 ROTATING HEADS EACH WITH 3 ROTATING DISCS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SOLDADORA DE MADERA - ALTA FRECUENCIA
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIANuevo con garantíaFeatures:Weight150 lbsDimensions66 × 43 × 44 cmSupply240 volt / 50hz (standard 13-amp 3-pin plug)Generator frequencyNominal 27.2 MhzCuring speed3 – 10 seconds per weldPenetration50mm effectiveOutput0.5 – 0.6 amps at 2400 volts (internal HT) on loadFinishHardwearing powder coated finishElectrical SafetyCabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp...
AMXmachinery
BASTONERA 1/2" - 2"
PARTE # 2TA-RM70 - BASTONERA PARA FABRICAR PALO REDONDO ESCOBA Y PERNOS Capacidad: Redondos de ½” a 2” de diámetro (10MM a 65 MM)Motor principal: 5 HP, 220V, 60 Hz, 3 fasesMotor alimentador: 1 HP, 220V, 60 Hz, 3 fasesVelocidad de corte: 2,900 RPMVelocidad de alimentación: de 6 a 21 metros por minuto (240” a 520” por minuto)Peso neto: 350 KGSPeso Bruto: 510 KGSTipo de empaque: 1 cajaMedidas de la Caja: 40” x 40” x 40”La maquina incluye cabezal para 7/8” con cuchillas de acer...
AMXmachinery
ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 96” ANCHO
PARTE: 2TA-SET-86TS –
ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 96” ANCHO
Nueva con garantiaThe automatic high-speed
through feed device allows for perfect finishing at speeds ranging from 12 ~ 52
FPM.
Suitable for mass
production of wood working factory for processing of double end cutting,
tenoning, grooving, moulding, and sanding.
It is a powerful machine
great for heavy-duty production.
In addition to the
double end cutting, all the settings and other processing can...
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 5.95 LITROS
PARTE:
2PG-SC2 - HORNO PARA CERAMICA, VIDRIO, METALES – 5.95 LITROSNUEVO CON GARANTIAIdeal for Teachers“I have traveled with my SC-2 for 11 years. I sometimes have to use welding gloves to put the warm kiln on a cart, take it outside, load it in the car, and wrap it in a wool blanket.“I have traveled out of state with my SC-2 repeatedly. Fired it over and over again in class, burned up all manner of skewers, toothpicks, cork clay and more. The kiln can take it! While I'm sure the kiln wou...