Identificador: 1695
Abierta
Descripción
PARTE: 2CK-SS512CB
- 1 ¼” interchangeable spindle is standard (other sizes available)
- Large cast-iron table is ground and polished for maximum stability and durability
- Powerful 7.5 HP motor for even the most demanding profiling work
- Five spindle speeds can be easily adjusted to suit your tool diameter
- Electronic spindle brake for added safety and facilitates with fast changeover
- Precision fence assembly with micro infeed and outfeed fence adjustment
- Finger style fence allows fence to be adjusted around the cutter for added safety and workpiece stability
- Cast iron ground & polished table with insert rings & t-slot for mitre / tenoning jig
- Precision ground and electronically balanced spindle
- V-belt drive with (5) spindle speeds is easily accessed from the front of the machine (3/4/6/8/1000 RPM)
- Electric spindle brake for added safety
- Spindle lock – with limit switch safety, machine will not start with lock engaged
- Micro spindle height adjustment with dial indicator for precise height adjustment
- 1 ¼” Interchangeable cutter spindle is standard
- Forward/reverse spindle rotation
- Adjustable “finger” type fence
- Independent micro-fence adjustment on both sides
- Plug to accept Cantek Power Feeder and table is pre-drilled for mounding feeder base
Includes the following standard equipment:
- 1 ¼” spindle
- (1) 5” dust chute on guard & (1) 4” dust chute in the table
- Safety guard
- Mitre tenoning jig
|
Table size |
31 1/2 “ x 39.4” |
|
Spindle speeds (5) |
3000/4000/6000/8000/10000 RPM |
|
Spindle taper |
5 MT |
|
Spindle diameter |
1 ¼” |
|
Motor |
7.5 HP |
|
Largest diameter of cutter: |
|
|
Above table |
8 ¼” |
|
Below table |
13 ¼” |
|
Fence size |
6” x 43” |
|
Vertical spindle stroke |
7” |
|
Useable length of spindle |
5 ½” long |
|
Dust port |
(1)5” on guard, (1) 4” in table |
|
Total HP |
7.5 HP |
|
Net weight |
1034 lbs. |
|
Machine dimensions |
48.4” x 39.4” x 52 ¾” |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CAJA MANUAL Y FRENO
CAJA MANUAL Y FRENO PARTE: 2GM-BB-4816H48" Manual Box and Pan Brake, crafted to excel in the realm of fabrication. Engineered for precision, it effortlessly shapes 16-gauge mild steel into sleek angles of up to 135°. With its arsenal of 16 removable fingers, this brake is finely tuned for box forming and a spectrum of specialized bending operations. Embrace its versatility as you navigate the intricacies of your fabrication projects, whether employing the fingers individu...
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA - 14 PULGADAS
PARTE: 2CK-SRS330Is a single-blade ripsaw is geared towards the shop looking to increase efficiency in their ripping operations but cannot justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the SRS330 can produce a glue joint finish ready for panel glue-up right out of the saw.Produces a guaranteed glue joint finish to 13′, which eliminates the need to joint the material after rippingPrecision straight line feeding for parallel...
AMXmachinery1
CORTADORA DE METAL HIDRAULICA
CORTADORA DE METAL HIDRAULICA PARTE: 2GM-HS-1014MDTaiwan machinesISO 9001 certifiedHD all steel construction for maximum rigidityGerman logic quiet Rexroth hydraulic systemAdjustable stroke from 16-20 strokes per minute60” long squaring arm with inch / mm scaleSpring hold-downsHigh grade carbon/chrome alloy steel blades and hardened to 62 hrc,2-edge indexable upper blade and 2-edge indexable bottom bladeFull length with full view finger guardFront supports and (2) side g...
AMXmachinery1
TORNO 26 X 80''
TORNO 26 X 80'' PARTE: 2GM-268026” x 80”, 4-1/8” bore, 10HPISO 9001 certifiedLarge spindle bore 4-1/8”Heavy Duty spindle D1-8Heavy Duty guideway width 16”Heavy Duty main motor 10HP4-Way Rapid Traverse16 spindle speeds from 25-1,600 rpm, 16 speeds54 kinds of inch threads, and 54 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced, hardened and precision groundSpindle is supported at 3-point by h...