Identificador: 94
Abierta
Descripción
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138
All Form 8' capacity
- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz
- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)
- Standard Features:
- Overhead clamp and vacuum system
- Forming length capacity 100"
- 1 ½” maximum forming radius. (3” thick material)
- Foot print 4' wide X 11' long
- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit
- Integrated timer. Individual control on all air components.
- Working height 36"
- Crated weight 1855 LBS.
- Shipping dimensions 143” long X 46” wide X 57” high
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12456 - ENCHAPADORA DE CANTOS - HOLZ-HER SPRINT 1411-3
PARTE: 12456 - ENCHAPADORA DE
CANTOS - HOLZ-HER SPRINT 1411-3
USADA - BUENAS CONDICIONES
AMXmachinery
PARTE: 2PG-F-130 – HORNO PARA CERAMICA, VIDRIO, METALES – 25 LITROS
PARTE: 2PG-F-130 – HORNO PARA CERAMICA, VIDRIO, METALES – 25 LITROS
Nuevo con garantía
Temperatura Máxima: 926 grados centígrados
2400 watts, 20 Amps
Medidas interiores: 279 mm ancho x 279 mm fondo x 330 mm
alto You can make figurines up to 12” tall in the
F-130. Anneal large glass beads and marbles. Raise the spring-loaded
vertical-drop door to insert a glass figurine with a punty rod. Lower the door.
The punty rod will extend outside the firing chamber through the s...
AMXmachinery
ENCHAPADORA DE CANTOS – 220V, 2 FASES
PARTE: 2MK-CBC.T – ENCHAPADORA DE
CANTOS – 220V, 2 FASES
Nueva con garantíaFRONT/REAR TRIMMINGTOP/BOTTOM TRIMMING
BUFFING UNIT
This
machine is a master piece of engineering, packet with features that will make
your job easier giving you a product finish like never before. Super steady and
stable the CBC.T platform is a stainless steel mono-block base. All operating
units are easy to be accessed through the upper protection hood.
The
friction-free worktable feed panels ...
AMXmachinery
TORNO COPIADOR AUTOMATICO 59" ANCHO
PARTE # 2TA-CL-51SAP – TORNO COPIADOR AUTOMATICO – 59” ANCHONuevo con garantiaFeatures:The lathe is suitable for little quantity and multiple style production use.Just put original material or template for duplicate productions.It is not needed to use profile knife for cutting, saves the cutter's cost.The cutter carriage's forward and backward movements are hydraulically operated with feed speed control providing a smooth motion and stable cutting performance.Adopts the precision hydraulic...