Identificador: 941
Abierta
PARTE: 3AU-DEBU1000 - LIJADORA DE CEPILLOS - PARA METAL - CAPACIDAD 1000 MM ANCHO
AMXmachinery
Descripción
PARTE: 3AU-DEBU1000 - LIJADORA DE CEPILLOS - PARA METAL - CAPACIDAD 1000 MM ANCHO
Round Chamfering Machine produces a surface so smooth that a nylon stocking is not snagged. AuDeBu1000 is a deburring machine specializing in round chamfering and capable of simultaneous treatment of large quantities of small-size work and medium-size work up to 1,000mm wide. Round chamfering of product edges has become the standard in sheet-metal processing. As the demand for round chamfering increases, we can meet that demand with the highest quality. We also provide a clean deburring station that is safe and comfortable.
Quality = Design
Remodeling machines with fundamental design problems will never make them better! You’ve seen many deburring machines that are the primary cause of dust inside factories, haven’t you? The redesigning concepts for our Sheet-Metal Deburring Machine AuDeBu were born from such lessons of the past. Seeking the ultimate deburring machine is the mission for AuDeBu through our design concept, “Simple is best.”
A drive system not troubled by dust!
Dust created from the deburring process causes serious problems for the intricate gears of the machine, such as extreme abrasion on gears, seizing of the moving parts, and negative affects on the air pressure unit and sensor. A new configuration was adopted that solved all these problems.
Efficient Six Brushes
A six-brush structure is installed in AuDeBu to increase productivity. This allows ideal deburring without excessive load pressure on the product.
Thickness Measurement System (TMS)
The TMS measures the thickness of the plate for round chamfering, eliminates the inputting process and prevents careless mistakes from occurring. The board thickness is measured by laser so the adjustment of the brush position is fully automatic. As a result, the development of a fully automated line is now possible.
Technical data
Width of the machine: 2000mm
Depth of the machine: 2110mm
Heights of the machine: 2000mm
Weight of the machine: 1500kg
Heights of working table: 921mm
Maximum height of the work: 20mm
Maximum width of the work/th>: 1000mm
Brushes: 6
Brush rotation speed: 400〜1200rpm
Brush frame rotation speed: 5〜16rpm
Belt conveyor speed: 0.3〜12m/min
Dust suction opening: φ250mm
Exhaust blower opening: φ250mm
Main power: 21.4kW
Supply voltage: AC 3φ200V 50/60Hz
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59” - FRIULMAC
PARTE: 12414 – ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59”
- FRIULMAC
USADA - BUENAS CONDICIONESFriulmac
AutomaticCut Off
MachineCutting
Length 6.29" - 59.05"Working
Width 1.18" - 5.51"Working
Thickness 0.47" - 1.37"Four 4HP
(3KW)Trim/Cut-off Motors 2 (2 each side)Saw
Blade Diameter 150mm Max X 30mm boreDust
Collection 4 X 120mm Outlets
New in
2019Video: https://www.youtube.com/watch?v=b5BPcY82hjs
AMXmachinery
PARTE: 12533 - ESCOPLO OSCILANTE - 2 MESAS - BALESTRINI
PARTE: 12533 - ESCOPLO OSCILANTE -
2 MESAS - BALESTRINI
USADO - MUY BUENAS CONDICIONESModelo MicronMax
oscillation length: 120mm (4.8")Max
slot depth: 80mm (3.2")Max
slot thickness: 30mm (1.2")Hourly
production: 500-800 slotsSpindle
rotation: 9,000 RPMOscillations
per min.: 60-350Max
table inclination: 20 degreesTables
19" x 9"Pneumatic
holddown on each tableSpindle
motor: 3HPOscillation
motor: 1/2HP
Current
Voltage: 220v
AMXmachinery
PARTE: 2TA-DR-06HFKLN – SECANTE DE MADERA – ALTA FRECUENCIA – CAPACIDAD 6 METROS CUBICOS
PARTE: 2TA-DR-06HFKLN – SECANTE DE MADERA – ALTA FRECUENCIA – CAPACIDAD 6 METROS CUBICOSNew with warrantyFeatures:HF vacuum drying equipment is a relatively small and fast timber drying machine, it is used to dry hard wood and thicker timber ,which solves the distortion and crack problems of hardwood and larger section timber, it is very suitable for the solid wood furniture factory, solid wood door factory, solid wood cabinet door factory and timber process factory to dry the timber in la...
AMXmachinery
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVEN
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVENUsada - Muy buenas condicionesFeatures and Specifications:Saw capacity of 6" width x 8" vertical capacity. Minimum working 2” high X 12” long. Main drive motor to saw frame is 30HP 3PH, wired 460 VServo drive system to feed works is 1/4HP 3PHBlower to saw frame rack for added cleaning value is 3HP 3PHBody of frame saw is (2) sections allowing for fast access to the saw frameSaw blade speed is fixed at 550RPMDust extraction requires min 3000 CFM and...