ID: 2682
Open
.jpg)
Description
PARTE: 2GB-160 - CORTADORES - FINGER JOINT - ESTILO JAPONES - 2 ALAS
PARA TROMPO O ESPIGADORA
DIAMETRO TOTAL | ESPESOR | FLECHA | LONGITUD JOINT | PARTE # |
160mm | 4.0mm | 70mm | 12mm | 2GB-160X4X0.6X70-2T |
160mm | 4.0mm | 50mm | 12mm | 2GB-160X4X0.6X50-2T |
160mm | 9.0mm | 50mm | 12mm | 2GB-160X9X50-2T |
160mm | 10.0mm | 50mm | 12mm | 2GB-160X10X50-2T |
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICO
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICOThe PICO machine cuts round dowels or round end tenons on chair and case goods components. PICO cuts horizontal or vertical tenons on three compound angles sim-ultaneously without the use of special fixtures. The PICO machine is equipped with the exclusive, patented Balestrini anti-splitting cycle. With this system, the tables are fixed and the tool always enters the wood with the grain (climb cutting) and eliminates any tear-out.The PIC...
AMXmachinery
PART: 12565-E - DUST COLLECTOR - MOTOR 10 HP - BELFAB
PART: 12565-E - DUST
COLLECTOR - MOTOR 10 HP - BELFABUSED - VERY GOOD
CONDITIONMain Motor: 10 HP, 230/460v, 3phStart/Stop
Station for 230v, 3phChip Collect in
Two Lower Plastic Bags
Filtration Surface (sq.ft): 331.63
AMXmachinery
PARTE: 2RS-TRIO-CR42 – SEPARADOR MAGNETICO – HEAVY DUTY – TRIO CR42
PARTE: 2RS-TRIO-CR42 – SEPARADOR MAGNETICO – HEAVY DUTY – TRIO CR42
Nueva con garantía
TRIO
Model CR42
Self-Cleaning
Electro Magnetic separator complete as follows
Heavy Duty Steel Frame
42" x 48" air cooled magnet with wound coils and class H insulation
Designed for overhead suspension (4) contact points
5 HP TEFC 1800-RPM Electric Motor
Class I Shaft Mount Gear Reducer
Belt Drive complete with guard, drive belts, sheaves and bushings
Self-Cleaning Belt complete with H...
AMXmachinery
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"Nueva con garantíaPara palos de escoba, trapeadores y recogedoresAlta produccionCapable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use ...