Identificador: 2473
Abierta
Descripción
PARTE: 2CA-RM150 - BASTONERA - CAPACIDAD 1” - 5” DIAMETRO
NUEVA CON GARANTIA
- The unit is designed solely for shaping of round poles in wood working factory.
- The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.
- The cutting head has been proven flawless through experience and study of many years.
- The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board, carbon, bakelite, bamboo and wood.
- A hand wheel is provided to adjust simply the feed rollers.
- Wood fragments and dust are cleared off from the unit thoroughly in coherence with spindles revolution.
- Cutting of each type and size of workpiece will be carried out by specific cutter head and rollers for finished products.
- Automatic feeding, one-piece cast iron base.
- High-efficiency industrial TEFC motor for powerful cutting.
Design and specifications are subject to change without prior notice.
| SPECIFICATIONS | ||
| Motor of Main Cutter | ||
| Feed Motor | ||
| Cutter Speed | ||
| Feed Speed | ||
| Total Knife | ||
| Working Size | ||
| N.W. | ||
| G.W. |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LAMINADORA 62" RODILLOS PLANOS
PARTE # EV-0257 – PICH ROLLER 62” - RODILLOS PLANOS - EVANS 0257Pinch Roller 62" capacitySolid top and bottom rollers for flat panel laminatingSafety Gates on In-Feed and Out-FeedSolid Top and Bottom RollersFeed Rate: 50’ FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 Hz (Options Available)Air Requirement: 100 PSICrated weight 790 LBS. Shipping dimensions 85” long X 33” wide X 57” highOption...
AMXmachinery
MAQUINA DE JUNTAR LISTONES
PARTE # 2FZ-MAS130 - MAQUINA DE JUNTAR LISTONESNueva con garantíaMáquina de Juntar Listones, con equipamiento para aplicación de la cola sobre el hilo, modelo “MAC 10” y DPA con riscador.Datos TécnicosLargo máx. del panel: 3.3 mAncho máx. del panel: 1.3 mAncho min. del panel: 0.45 mEspesor máx. del listón: 40 mmLargo mín. del listón: 20 cmCapacidad de producción en metros cuadrados p/hora: 180Potencia total instalada:(con aplicador de cola MAC-10) 24 kWConsumo de aire comprimido, ...
AMXmachinery
LAMINADORA DE MOLDURAS - CON ENGOMADORA PUR-PO-EVA
PARTE:
4VE-VEP350-KL6.5-WMP-1 - LAMINADORA DE MOLDURAS - CON ENGOMADORA PUR-PO-EVA
Nueva con garantíaGLUE PUR-PO-EVA WİTH CASSETTE SYSTEM 2,5 4 M
(with 1 pc Glue tank) NO STANDARD SPECIFICATIONS QTY1 2,5m
main body 4m cassette ...
AMXmachinery
BRIQUETTER - METAL CHIPS - HYDRAULIC
PART:
3CH-83A-160-E - BRIQUETTER - METAL CHIPS - HYDRAULIC
NEW - WITH WARRANTYMetal scrap briquetting press machine can compact the different kinds of chips like cast iron,aluminum,copper,magnesium,titanium,molybdenum etc metal crap chips into high density blocks without any additive,greatly reduce the casting cost.Specifications:
Model
unit
3CH-83A-160
3CH-Y83-160
3CH-Y83-230
3CH-Y83-300
3CH-Y83A-300...