ID: 449
Open
Description
PARTE: 1SL-DC-DP13N - TALADRO DE BANCO - MOTOR 3/4 HP, 110V, 1 FASE
NUEVO CON GARANTIA
MOTOR: 3/4 HP, 110V, 60 Hz, 1 FASE
12 VELOCIDADES: 360 - 3060 RPM
CHUCK: 1.5 A 13 MM (5/8")
DISTANCIA DEL CHUCK A COLUMNA: 150 MM
CARRERA CHUCK: 65 MM
DISTANCIA DEL CHUCK A LA MESA: 355 MM
DISTANCIA DEL CHUCK A LA BASE: 495 MM
DIMENSIONES DE LA MESA: CIRCULAR DE 255 MM
DIMENSIONES TOTALES: 920 MM X 255 MM X 540 MM
PESO: 38 KGS
EMPAQUE: 1 CAJA
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12572 - PRENSA DE RADIO FRECUENCIA - OGDEN
PARTE: 12572 - PRENSA DE RADIO FRECUENCIA - OGDEN
USADA - BUENAS CONDICIONES
Curing
area: 36” x 60” x 2” thick.
Clamping
pressure is applied by multi-power (dual pistons on a common shaft) pneumatic
cylinders to maximize pressure while relying on standard plant pressures.
Unlike presses without multi-power cylinders, which require booster
compressors, the Model SL36x60 reaches full capacity at 100-psi plant air
pressure.
Edge
pressure is applied by eight (8) each pusher ...
AMXmachinery
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTA
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...
AMXmachinery
REASERRADORA 3 SIERRAS 12"
PARTE # 2TA-BS-1212HR-3 - REASERRADORA HORIZONTAL - 3 SIERRASNUEVA CON GARANTIASpecificationsBS-1212HR-TNBS-1616HR-TNMax. Cutting Capacity12" x 12"16" x 16"Distance between Blade to Conveyor1/4" ~ 12"Saw Wheel Diameter28" x 2Saw Blade Length (Width)201" (2")201" (2" ~ 3")Saw Blade Speed6000 FPMFeed Conveyor Width12"16"Feed Speed (Variable)0 ~ 90 FPMMain Motor (Each Head)20 HP x 230 HP x 2Saw Blade Lift Motor1/2 HPFeed Conveyor Motor3 HPDust Hood4" x 6N. W.7200 LBS8600 LBSMachine was built with r...
AMXmachinery
PARTE: 1SL-DC-CH30 - TALADRO DE COLUMNA - MOTOR 2 HP, 220V, 2 FASES
PARTE: 1SL-DC-CH30 - TALADRO DE COLUMNA - MOTOR 2 HP,
220V, 2 FASESMOTOR: 2 HP, 110/220V, 60 Hz, 1 FASE12 VELOCIDADES: 180 - 2940 RPMCHUCK: 5 A 20 MM (3/4")DISTANCIA DEL CHUCK A COLUMNA: 255 MMCARRERA CHUCK: 120 MMDISTANCIA DEL CHUCK A LA MESA: 660 MMDISTANCIA DEL CHUCK A LA BASE: 1100 MMDIMENSIONES DE LA MESA: 470 X 415 MMDIMENSIONES TOTALES: 1430 X 670 X 330 MMPESO: 138 KGSEMPAQUE: 1 CAJA* INCLUYE PRENSA DE 6"