Identificador: 2078
Abierta
Descripción
PARTE: 12440 - LIJADORA BANDA ANCHA – 1 LIJA - 37” ANCHO - CEMCO
USADA - BUENAS CONDICIONES
Manufactured in 1999
• Combination sanding head with 5 ½”
contact drum and 3 ½” platen
• 20 HP TEFC Dual Voltage Motor, 460
Volt, 3 Phase, 28 Amps
• Start, Stop and E-Stop buttons with
magnetic starter and locking disconnect
• Motor brake Via E-Stop
• 1 HP feed motor
• 37” x 75” Sanding belts
• Manual variable feed speed, 15 – 60 fpm
• Manual thickness adjustment with readout
• 4 Jackscrews
• Maximum thickness of 6.5”
• 2 Spare Platens
• Spare contact roller
• Extra sanding belts:
o 180 Grit, Wurth Paper Backed, 10 pcs
o 220 Grit, 3M Cloth Backed, 5 pcs
o 50 Grit, 3M Cloth Backed, 10 pcs
• Complete operations manual
• Pneumatic valve bank replaced
Good condition, As taken from service, Cleaned and checked
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
PARTE:
2FA-RM6X6 - REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
NUEVA CON GARANTIA
Very similar to our 6 x 8
This automatic machine is
equipped with a powered hold-down and an innovative powered belt return, which
is self adjusting and offers operators the ability to fine-tune the return belt
height and angle to fit your specific mix of products.
When setting the sawblade to
the desired board thickness, the feed belt conveyor and the return belt are ...
AMXmachinery
SHAPER WITH FEEDER - MOTOR 7.5 HP - LARICK 390
PART:
12327-E - SHAPER WITH FEEDER - MOTOR 7.5 HP - LARICK 390
USED
- EXCELLENT CONDITIONS
230/460V,
3 PHASE
AMXmachinery
COMPRESOR PISTON - MOTOR 3 HP – VERTICAL
PARTE: 1SL-DC-3V150 – COMPRESOR DE PISTON VERTICAL –
MOTOR 3 HP – 150 LTSNuevo con garantíaNuevo con garantíaCompresor de 3 HP VerticalTanque: 150 LitrosCabezal Marca MSL10MAX ...
AMXmachinery
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"Nueva con garantíaPara palos de escoba, trapeadores y recogedoresAlta produccionCapable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use ...