Identificador: 2077
Abierta
Descripción
PARTE: 12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
USADO - EN BUENAS CONDICIONES
Manufactured in 2015
• 50.5 Total HP
• Spring loaded conveyor pin system
• Spiral insert knife cutterheads with
two sided solid carbide knives
• Digital electronic thickness
adjustment
• 25” Wide x 8” thick capacity
• Inverter variable feed speeds
• Sectional chip breaker and feed roller
before top head
• Removeable bottom head for knife change
• Chain feed drive
• Auto conveyor lubrication
• New replacement cost over $36,000.00
• Currently in storage, will load on truck
• Good condition, As taken from service
Maximum working width 25″
Maximum working thickness 8″
Minimum working thickness 0.315"
Minimum workpiece length 12.2″
Bottom head motor 20 HP
Top planing head motor 25 HP
Feed motor 5 HP
Table elevation motor 1/2 HP
Cutterhead diameter 4"
Knife dimensions 30mm x 12mm x 1.5mm w/ bevels (96 pcs per head)
Cutterhead speed 5400 RPM
Feed speed (variable) 26-80
FPM Dust ports 2 @ 6”
Table dimensions 27" x 103" (32" from the floor)
Machine voltage
460/3/60 = 63 amps
230/3/60 = 125 amps
Prewired 460
Volt Machine dimensions (LxWxH) 105″ x 45.1″ x 67.7″
Net weight 6600 lbs
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE BANDA ANCHA – 3 LIJAS – 52” ANCHO – TIMESAVERS
PARTE: 12190 – LIJADORA DE BANDA ANCHA – 3 LIJAS
– 52” ANCHO – TIMESAVERS
USADA – BUENAS CONDICIONES – POCO USO
50 HP,
460/60/3, 12" diam. rubber contact drum with hold-down shoes
50 HP,
230/460/60/3 platen with hold-down shoes
40 HP,
230/460/60/3 platen with hold-down shoes
5 HP,
208-230/460/60/3 feed system motor with Poweflex VFD
Powered
up/down conveyor with digital ProScale readout
75"
abrasive belt length, electric eye tracking, & motor load meters...
AMXmachinery
PARTE: 12512 – BASTONERA – HAWKER 2000
PARTE: 12512 – BASTONERA – HAWKER 2000
USADA – BUENAS CONDICIONES
Rodillos de alimentación
Navajas
Mangas
Afiladora
AMXmachinery
PARTE: 1SIL-R-OXIDOALUM-60CH - OXIDO DE ALUMINIO- GRANO 60 - COSTAL 20 KG
PARTE: 1SIL-R-OXIDOALUM-60CH - OXIDO DE ALUMINIO- GRANO 60 - COSTAL 20 KGPARTE: 1SIL-R-OXIDOALUM-80CH - OXIDO DE ALUMINIO- GRANO 80 - COSTAL 20 KG
AMXmachinery
SIERRA TRONZADORA DE 45 A 90 GRADOS AJUSTABLE – DISCO 20”
PARTE:
2TA-CS- 20RL45 – SIERRA TRONZADORA DE 45 A 90 GRADOS AJUSTABLE – DISCO 20”
NUEVA
CON GARANTIA
Features:
Adjustable
maximum 45 degree to the right or left or 90 degree angle setting for
semi-automatic, fast cutting.
Semi-automatic
by pneumatic movement cutting.
Auto.
cutting cycle simply operated by foot switch.
Sealed
long-life ball bearings.
Full 10
HP motor for powerful cutting capacity.
Precision
ground cast iron table with heavy metal cabinet st...