Identificador: 1630
Abierta
.jpg)
Descripción
PARTE: 1AM - EXTRACTOR TUBOAXIAL DIRECTO
Carcaza de acero al carbón, pintada con pintura electrostática y horneada. Aspa de aluminio anti-chispa. Accionado por acoplamiento directo a un motor eléctrico.
Características:
– Diámetro de aspa desde 16″ hasta 26″.
– Motores en voltaje 127/220V. y 220/440V.
– Volúmenes de aire: 4,200 hasta 18,725 PCM. Presión desde 0.2″ hasta 2.5″ columna de agua.
Usos:
Procesos comerciales e industriales, torres de enfriamiento, extracción de humo, gases en estacionamientos, viveros, etc.
|
Modelo
|
Potencia
HP |
Volumen
PCM MC/HR |
|
|
XTAD-16 |
1/2 |
4,200 |
7,136 |
|
XTAD-20 |
3/4 |
8,170 |
13,880 |
|
XTAD-24 |
1 1/2 |
14,530 |
24,686 |
|
XRAD-26 |
2 |
18,725 |
31,814 |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA CINTA 24" - 2 EN 1- 5HP
SIERRA CINTA 24" - 2 EN 1- 5HP 2CK-HB600AIs heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 5HP motor allowing you to make your cuts with ease. This bandsaw delivers high accuracy for maximum production along with a simple design that assures...
AMXmachinery1
MAQUINA DE PASADORES
MAQUINA DE PASADORESHigh quality drilling and dowel insertion• Drilling from 4 sides : top, right, left, back• 2 step machine – drilling and doweling• Doweling from 2 sides (left and right)• Capacity of up to 18 pcs/min• Vertical magazine• One-man operatedExtra:• Side movement• Single drop magazine• Possibility to revers items out of the machine• Can be integrated in a line of machines• Waste ConveyerLength:160 – 1500 mm160 – 2200 mmHeight:10 – 40 mmWidth:25 – 250...
AMXmachinery1
ENCHAPADORA DE CANTOS - 230V, 1-3 FASES
PARTE: 2CK-MX340MIs an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry the MX340M can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Compact design makes it the ideal edgebanding solution for small worksho...
AMXmachinery1
TORNO 20'' x 80''
TORNO 20'' x 80'' PARTE: 2GM-GML-2080Bed Gap Metal Lathe with a big spindle bore 3-1/8". Precise, robust, and fully equipped with a 29 swing in gap. Whether you're in a machine shop or looking to replace your old workhorse in your home garage, this metal lathe is for you. It comes standard with a fully assembled metal stand with two cabinets on each side to keep your tooling and accessories stored.ISO 9001 certified1-Year Parts Only WarrantyLarge spindle bore ...