Identificador: 1886
Abierta
.jpg)
.jpg)
.jpg)
Descripción
PARTE: AMX-10120 - EXTRACTOR DE AIRE - INDUSTRIA - RESTAURANT - COCINA - MOTOR 10 HP - LOREN COOK
USADO - MUY BUENAS CONDICIONES
ACERO INOXIDABLE
MARCA: LOREN COOK COMPANY
MODELO: 330 CPA - EF-1
HECHO EN USA
FABRICADO EN ALUMINIO - RUEDA INTERIOR Y CABINA EXTERIOR DEL EXTRACTOR
FABRICADO EN ACERO - ESTRUCTURA DONDE VA EL MOTOR, LA POLEA Y LA FLECHA EXTERIOR
MOTOR BALDOR 10 HP, 208-230/460V, 3 FASES
MEDIDAS TOTALES: 63” ANCHO X 52” FONDO X 67.5” ALTO
MEDIDA ENTRADA: 41” DIAMETRO ABERTURA CEJA
MEDIDA ENTRADA: 22” DIAMETRO ABERTURA ADENTRO
MEDIDA SALIDA SUPERIOR: 36” ANCHO X 25” FONDO
PESO APROXIMADO: 550 KG
==============================================================================================
Centrifugal unit with a welded backward inclined aluminum wheel.
Fully welded aluminum housing that meets AMCA 99, Type ‘A’ spark resistant construction guidelines.
Additional application includes corrosive airstream, general ventilation and up to 300º restaurant exhaust.
FEATURES
Fully welded aluminum backward inclined wheel
Full welded aluminum housing
Standard construction meets AMCA Type ‘A’ spark resistant construction
Housing field rotatable one of eight discharge position
Available in arrangement 10 (Belt drive)
Available in arrangement 4 (Direct drive)
Removable discharge flange
Lifting lugs
Cast regreasable bearings
CONSTRUCTION
Housing Material: Aluminum, Steel
Finish: Lorenized ™
Ventilator Type: Blowers/Utility Sets
Impeller: Centrifugal
Bearings: L-50, over 200,000 hours
CONFIGURATION
Mounting: Roof (Curb Mount), Roof (Rail Mount), Floor
Drive Type: Direct Drive, Belt Drive
Motor: AC
Class: 1, 2
Discharges: THD, TAD, TAU, DB, UB, BHD, BAU
Arrangements: 4, 10
Rotatable Housing: Yes
Max Operating Temp (Standard Construction): 180°F
Max Operating Temp (Alt. Construction): 300°F
Speed Control: VFD, Vari-Flow, SimpliDrive
Flow: Supply, Exhaust
Filtration: Unfiltered
The information provided was gathered from literature, internet &/or physical inspection.
It is thought to be accurate; but not guaranteed.
Pago y Devoluciones
- Forma de pago
- PayPal, Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Envio
- Ubicación de elemento de riesgo
- 31104, Chihuahua, México
- Retiros
- comprador debe recoger
- Devoluciones aceptadas
- No
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1SL-DC-TS12 - SIERRA DE MESA 12" - MOTOR 3 HP
PARTE:
1SL-DC-TS12 - SIERRA DE MESA 12" - MOTOR 3 HPMOTOR: 3 HP, 110/220V, 60 Hz, 1 FASESMEDIDAS DE LA MESA CON EXTENSION: 27" X 40-1/2"ALTURA MESA: 34-1/2"DIAMETRO DEL DISCO 12"DIAMETRO FLECHA 5/8"VELOCIDAD DEL DISCO: 4560 RPMRANGO ELEVACION DISCO: 0 A 4"RANGO INCLINACION DISCO: 0 A 45 GRADOSCAPACIDAD MAXIMA DE CORTE A 90 GRADOS: 4"CAPACIDAD MAXIMA DE CORTE A 45 GRADOS: 2-3/4"PESO: 127 KGS
AMXmachinery
COMPACTADORA DE CARTON – HORZONTAL – 20 HP
PARTE:
12353 – COMPACTADORA DE CARTON – HORZONTAL – 20 HP
USADO EN BUENAS CONDICIONESHas an
extra large feeder hopper that can be adapted to gravity, pneumatic or belt
conveyor automatic feed devices.Fully
automatic baling cycle with start-compress-and-stop action, requiring only a
part-time operator to tie-off bale and open ejector door. Bale automatically
gets ejected as new bale is being formed. Saves space and money.
550v, 3
phase, 60hz, 46 Amp
AMXmachinery
PARTE: 2AM-U-300 - ARMADORA DE MARCOS - SEMIAUTOMATICA
PARTE:
2AM-U-300 - ARMADORA DE MARCOS - SEMIAUTOMATICANUEVA CON GARANTIAThe U-300 is a bench-top, frame joining machine and the most popular model of custom frame shops. It is compact, well constructed, and built for many years of trouble free operation. The design of the U-300 allows the operator to set the front and back measuring stops for V-Nail insertion. The frame is then moved across the nail head and V-Nails are driven or stacked anywhere along the frame joint. The V-Nail insertion is a...
AMXmachinery
EXTENSION PARA TARIMAS LARGAS
EXTENSION PARA TARIMAS LARGASDistancia del inicio del barrote a donde empieza el resaque:Rango maquina tamaño standard: 5-1/2” – 24-3/4”Rango con extensión: 30” – 38”Para mas informacion y especificaciones contactenos