Identificador: 895
Abierta
Descripción
PARTE # 10303 - ESTUFA/SECANTE PARA MADERA - AMERICAN WOOD DRYERS
SON 2 CAMARAS JUNTAS
1 CAMARA DE 43,200 PIES TABLA
1 CAMARA DE 38,400 PIES TABLA
AMBAS ESTAN DESARMADAS
SE COMPRARON FUNCIONANDO EN ESTADOS UNIDOS Y NUNCA SE INSTALARON
NO INCLUYE LA CALDERA
TENEMOS 27 PLANOS EN PDF PARA FACILITAR EL ARMADO
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2CA-CM-8CAR - TALLADORA DE MADERA
PARTE: 2CA-CM-8CAR - TALLADORA DE MADERAFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees.Custom o...
AMXmachinery
COMPRESOR DE TORNILLO - 50 HP
PARTE: 12341 - COMPRESOR DE TORNILLO - 50 HP
USADO - BUENAS CONDICIONES
230/460V
Nominal 100 PSI, 110 Maximum
Nominal 236 Cubic Feet Per Minute Depending on Pressure
Setting
Variable Frequency Drive
Weight: 3000 lbs
Dimensions: 48" L x 72" W x 64" H
Recently serviced and ready to go!
AMXmachinery
SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
PARTE: 12417 - SIERRA INGLETERA
DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
USADA – MUY BUENAS CONDICIONES3
HP TEFC Dual Voltage MotorsWired
for 460 Volt, 3 PhaseStart
and E-Stop buttonsLeft
head fixed, Right head manually position via hand crankMinimum
Cut Length @ 90 = 13”Maximum
cut length @ 90 = 100”Both
heads rotate inward 90 to 45 degreeBoth
heads tilt outward to 45 degree for compoundTwo
hand anti tie down cycle control on pedestalBuilt
in 3rd party hydro-checkPne...
AMXmachinery
PARTE: 2GM-HBR – ROLADORAS HIDRAULICAS - 4 - 8 PIES
PARTE: 2GM-HBR – ROLADORAS HIDRAULICAS - 4 - 8 PIES
Nueva con garantía
2GM-HBR-0425 – ROLADORA
HIDRAULICA – 4’ x ¼”, 3 HP, 220/440V, 3PH
2GM-HBR-05316 – ROLADORA
HIDRAULICA – 5’ x 3/16” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0525 – ROLADORA
HIDRAULICA – 5’ x ¼” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0625 – ROLADORA
HIDRAULICA – 6’ x ¼” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0808 – ROLADORA
HIDRAULICA - 8’ x 8Ga , 7-1/2 HP, 220/44OV, 3PH
2GM-HB...