Identificador: 2556
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
CORTADORA DE METAL ESTILO GANG PARTE: 2GM-PS-4816GT
48” x 16 Ga, Gang Type Metal Slitter, Powered Slitter, 220V,1 phase
with NC programmable cut to length, 5” touch screen
- ISO 9001 certified
- American design and Taiwan quality machine
- Slit and cut to length in one unit
- NC programmable cutting length, 100 job memory feature
- Single cycle Mode-manual shearing with foot pedal when programmed length is reach for each cut.
- Auto cycle mode-shearing will auto cycle the programmed cut lengths.
- Easy removal of slitting blades for cut to length operations without slitting.
- feed the sheet metal from the manual decoiler to cut to length without slitting blades
- 5” Omron touch screen
- 3-1/8” diameter shafts mounted in precision ball sealed bearings
- Slitting blades are dual edged
- Safety type foot pedal control
- One year warranty for parts
- Comes with 6 sets of slitting blades to slit max 7 trips, change it to 7 strips
- full length finger guard
- Removable safety foot pedal control
- One set of upper & lower shearing blades
Specifications: | PS-4816GT |
Slitting and shearing capacity: width x thickness mild steel(hot roll) Tensile 60,000PSI stainless steel & cold roll, tensile 85,000PSI soft aluminum, tensile 28,000PSI min. thickness Max. slitting length |
48”x16Ga 48”x20Ga 48”x12Ga 30Ga 20ft, NC programmable |
Shearing blade length | 50” |
Shearing blade rake angle | 2 degree |
Infeed/outfeed table height | 32” |
Slitting blades | 6 pairs |
Slitting feed speed Shearing stroke | 57 FPM 35 |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
DOBLADORA DE TUBO
DOBLADORA DE TUBO PARTE: 2GM-SCM-5018RDPerfect for efficiently creating round ducting, this powered Seam Closing Machine streamlines and strengthens the process.Capacity 50" x 18 Ga. Mild steel/ GalvanizedMin. thickness 26Ga• ½” width of die groove for locking ½” seamMain motor 1-HP, 220V, 1 phaseMachine weight 485 LBSDimensions: 63" x 32" x 48"
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2CK-MX350Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments allow for efficient changeovers of edge tape th...
AMXmachinery1
EXTRACTOR -VENTILADOR INDUSTRIAL TIPO TAMBOR
PARTE: 1AM - EXTRACTOR -VENTILADOR INDUSTRIAL TIPO TAMBORDOS TAMAÑOS:VP-30: Aspa de 30″ de diámetroVP-42: Aspa de 42″ de diámetroCaracterísticas principales:*2 velocidades*Potente flujo de aire*30″ y 42″ de diámetro de aspa*Enchufe con borne de protección a tierra*127 volts*Llantas de plástico*Contiene 2 agarraderas, una en cada extremidad, para fácil movilidadUsos:*Ideales para usarse en talleres, bodegas y espacios exteriores.
Modelo
Potencia
WATTS
...
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2CK-MX370MIs designed to be a compact & durable entry level edgebander with pre-milling & corner rounding functions offered at an affordable price. This machine is equipped with pre-milling, combination end trimming & corner rounding unit, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mmCompact design with dual function end trim and corner rounding unitVersatile edgebander capab...