ID: 2530
Open
.PNG)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Description
CANTEADORA AUTOMATICA PARTE: 2CK-MX340M
Is an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.
- Compact design makes it the ideal edgebanding solution for small workshops
- Precise adjustments for optimum edge quality
- Chain feed system ensures consistent feeding of material for consistent results
- Available in 230V 1 or 3 phase
- PLC control system with LED display and keypad
- Workpiece is fed by chain
- Edge coil support plate: Ø 800 mm (31.5″), for PVC/ABS
- Automatic edge feeding with a thickness capacity of 0.4-3 mm;
- Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
- 1.2 kg (2.64 lb) Teflon-coated hot-melt glue pot
- Spring loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber)
- Heavy duty pressure beam with extendable work-piece support
- Heated infeed fence for pre-heating the panel for optimum glue penetration
- Mechanical digital readouts for convenient and quick adjustment to the working units & thickness
- END TRIM
8800 RPM dual saw blade (80mm / 3.15″) end trimming unit - TOP & BOTTOM TRIM
10500 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming - RADIUS SCRAPING
Radius scraper with 2mm radius knives can be easily excluded when not required - BUFFING
2800 RPM top & bottom buffing units to polish the machined edge
INCH | METRIC | |
Feeding speed | 23 FPM | 7 m/min. |
Panel thickness | 0.472~1.77″ | 12~45 mm |
Edge thickness | 0.0158″~0.118″ | 0.4 ~ 3 mm |
Minimum panel width | 3 ½” | 90 mm |
Minimum panel length | 3 ½” | 90 mm |
Working table height | 33.5″ | 850 mm |
Dust collection outlet dia. | 2 x 4″ | 2 x 100 mm |
Total connected power | 5 HP | 3.8 KW |
Air | 7.06 CFM / 85 – 100 PSI | 200 litres/min / 6 – 7 kg/cm2 |
Max. machine dimensions (LxWXH) | 115″ x 47″ x 48″ | 2921 x 1194 x 1220mm |
Machine weight | 968 lbs. | 440 kgs. |
Shipping dimensions (LxWxH) | 89″ x 29″ x 50″ | 2261 x 737 x 1270mm |
Shipping weight | 1115 lbs. | 507 kgs. |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
SIERRA CINTA - 20 PULGADAS
PARTE: 2CK-HB500RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple design that assures minimum ma...
AMXmachinery1
ASTILLADORA - HORIZONTAL - 15 X 4 PULGADAS - CON BANDA TRANSPORTADORA
PARTE: 2TA-WG-1504HC - ASTILLADORA - HORIZONTAL - 15 X 4 PULGADAS - CON BANDA TRANSPORTADORAFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cuttin...
AMXmachinery1
SIERRA CINTA 24" - 2 EN 1- 5HP
SIERRA CINTA 24" - 2 EN 1- 5HP 2CK-HB600AIs heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 5HP motor allowing you to make your cuts with ease. This bandsaw delivers high accuracy for maximum production along with a simple design that assures...
AMXmachinery1
ENLAZADORA CNC
ENLAZADORA CNC PARTE: 2CK-CN600Provides optimal flexibility & output in the production of dovetail drawer boxes. The user friendly touch screen interface allows the operator to select from a range of standard dovetail joints as well as program the spacing or pitch of the dovetails. This allows for maximum flexibility to ensure the optimal aesthetic result. The dovetail milling unit can also pre-score the workpiece to ensure the best possible finish. In addition, the machining s...