ID: 1647
Open
Description
PART: 3CH-83A-160-E - BRIQUETTER - METAL CHIPS - HYDRAULIC
NEW - WITH WARRANTY
Metal scrap briquetting press machine can compact the different kinds of chips like cast iron,aluminum,copper,magnesium,titanium,molybdenum etc metal crap chips into high density blocks without any additive,greatly reduce the casting cost.
Specifications:
|
Model |
unit |
3CH-83A-160 |
3CH-Y83-160 |
3CH-Y83-230 |
3CH-Y83-300 |
3CH-Y83A-300 |
3CH-Y83-800 |
3CH-Y83-1000 |
|
|
Nominal Force |
KN |
1600 |
1600 |
2300 |
3000 |
3000 |
8000 |
10000 |
|
|
Briquetting Size |
Mm |
Φ90× （60-85） |
Φ90× （60-110） |
Φ110× （70-120） |
Φ120× （70-120） |
Φ120× （70-120） |
Φ180× （165-18） |
Φ220× （200-25） |
|
|
Briquetting Density |
Kg/m3 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
|
|
Working Pressure |
Mpa |
23 |
16 |
23 |
21 |
26.5 |
25 |
25 |
|
|
Production Rate |
t/h |
0.6-0.9 |
0.6-0.9 |
1.0-1.5 |
1.2-1.8 |
1.2-1.8 |
6-7.5 |
8.5-12 |
|
|
Total Power |
Kw |
24.2 |
24.2 |
39.2 |
47.2 |
49 |
185 |
225 |
|
|
Machine Weight |
Kg |
4500 |
6000 |
7500 |
8800 |
7500 |
50000 |
60000 |
|
|
Machine Total Size |
Mm |
4900×1470 ×1522 |
4100×1086 ×2006 |
4100×1086 ×2006 |
5000×1600 ×2600 |
4000×1400 ×3700 |
8000×6500 ×2500 |
9000×7500 ×2500 |
|
Metal scrap briquetting press machine can compact the different kinds of chips like cast iron,aluminum,copper,magnesium,titanium,molybdenum etc metal crap chips into high density blocks without any additive,greatly reduce the casting cost.
Fully hydraulic control equipment, the electric equipment main control part adopts PLC control, the whole working process can realize the automatic operation, reduce the labor intensity and labor.
The system is provided with a manual work procedures, easy to realize the move forward and backward, the mold open and close action adjustment.
The device is provided with one time and two times feeding program,easy to press different size of metal chips
According to customer requirements can increase the automatic feeding, discharging device
Hydraulic system adopts two-ways cartridge valve, with the good sealing performance, good open and close characteristics, pollution resistant etc advantages.
Special unloading loop and the liquid electrical switch protection circuit is arranged in the hydraulic system, to make the machine run smoothly, but also improve the service life of hydraulic components.
The electric control adopts the manual, automatic and two times feeding technology, can conveniently adjust the operation mode and the feeding length, in order to get the material pressing block suppression of different materials and sizes.
The machine adopts the micro movement hopper on pressing device, solved the not easy to feed and discharge problem, also reduce the abrasion of the guard of discharging.
The hydraulic cylinder adopts the main pressure cylinder and fast forward cylinder connected to form the composite cylinder, improve the operating speed, reducing the energy consumption of the motor, but also improve the production efficiency.
The machine adopts PLC control
The machine pressed metal block has large diameter, high density, resist broken, good surface finish, not easy oxidation etc. advantages.
This machine adopts a fully enclosed structure form, can recycling cutting fluid in the metal chips and prevent oil leaking pollution.
Compact different kinds of chips like cast iron, aluminum, copper, magnesium, titanium, molybdenum etc. metal crap chips into high density blocks without any additive, greatly reduce the casting cost.
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S50
PARTE: 12420 – SIERRA OPTIMIZADORA
– WEINIG DIMTER OPTICUT S50
USADA – MUY BUENAS CONDICIONESVoltage:
440/3/60Year:
2013
4" x 12" wide max. board capacity 14`
material capacity infeed & 8` outfeed table Loading bars attached to front
of infeed table Equipped with 9 HP arbor motor, 1.5 HP pusher bar servo motor,
197 FPM max. feed speed; Servo controlled pusher arm travels full length of
board, measures, positions and feeds board into saw; capable of single-piece
& pack...
AMXmachinery
DEBARKER NICHOLSON 27"
PARTE # 11604 – DEBARKER - NICHOLSON 27" A5A RINGEN BUENAS CONDICIONES DE OPERACIONLEFT HANDAIR SEAL
AMXmachinery
ESPIGADORA 2 MESAS
PARTE: 2TA-SET-100 - 3YC-YRT-115 - ESPIGADORA - 2 MESAS - AMX MACHINERYNueva con garantiaBuilt with two working tables for high efficiency operations.Table longitudinal traverse is pneumatic operated for smooth cutting.Tenon’s width is easily adjustable by hand wheel.Convenient tenon depth adjustment from outside without removing covers.Table can be tilted to 20 degrees at each side for angular tenon.Cutter moving speed is infinitely adjustable to achive the best results.Pneumatic hold down c...
AMXmachinery
PARTE: 12615 - REASERRADORA HORIZONTAL - 1 BANDA – 16” ANCHO X 12” ALTO
PARTE: 12615 - REASERRADORA HORIZONTAL - 1 BANDA – 16” ANCHO X 12” ALTOUsada - Excelentes condiciones - Solo 50 horas de usoWoodmizer HR130Manufacturer specs:15 HP electric power 230 V, 3 phasePowered blade height adjustment8° tilting bed0 - 85 ft/min variable feed16" wide x 12" high cant capacityCurrently just under 50 hours of use