Identificador: 1946
Abierta
Descripción
PARTE: 1ZU-001 - BOMBA HIDRAULICA - 3 HP - 2,500 LBS - TANQUE 60 LTS - VIKERS
USADA - BUENAS CONDICIONES
MOTOR 3 HP, 220/440V, 3 FASES, BALDOR
2,500 LBS PRESION
3 GALONES/MIN
TANQUE 60 LTS
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2EB-KSF-24303 - ARMADORA DE MARCOS – KSF - 24303
PARTE: 2EB-KSF-24303 - ARMADORA DE MARCOS – KSF - 24303Nueva con garantiaFrame/moulding width range: 6-150 mm (0.24"-5.9")Frame/moulding thickness range: 6-100 mm (0.24"-3.94")V-nail sizes: 7,10,12,15mmWeight:56kgPackage Dimension : 43.3" (L) x 21.6" (W) x 23.2" (H)Packing: wooden packingFeaturesAny hardness of wood can easily nail cornersNo power required, no air pressure required, This machine removes most of the electronic components, which also greatly reduces the damage rate of this machi...
AMXmachinery
PARTE: 12564 - PRENSA ARMADORA DE GABINETES - 98” ALTO X 55” ANCHO X 24” FONDO
PARTE:
12564 - PRENSA ARMADORA DE GABINETES - 98” ALTO X 55” ANCHO X 24” FONDONueva - Nunca UsadaUHLING - HP3000Vertical designPneumatic operationClamping Capacity 55" L x 96" H x
24" DClamping operation is accomplished through four
dual pod pressure bars which are activated and can be individually selected for
quick accurate clamping up to 120 PSIStroke length 3-1/2"Roller bearing mounted carriage with pneumatic
locks
Carriage
mounted operators panel
AMXmachinery
PARTE: 12558 - CENTRO DE MAQUINADO - 2014 HAAS VF-6SS
PARTE: 12558 - CENTRO DE MAQUINADO
- 2014 HAAS VF-6SS
USADO – MUY BUENAS CONDICIONES
SPECIFICATIONS:
TABLE
LENGTH 64"
TABLE
WIDTH 28"
TABLE
CAPACITY 4,000 lb
X-AXIS
TRAVEL 64"
Y-AXIS
TRAVEL 32"
Z-AXIS
TRAVEL 30"
SPINDLE
SPEED 10,000 RPM
SPINDLE
MOTOR 30 hp
SPINDLE
TAPER CAT 50
TOOL
CAPACITY...
AMXmachinery
PARTE: 2CA-RM70 - BASTONERA – CAPACIDAD 3/8” - 2-3/8” DIAMETRO
PARTE: 2CA-RM70 - BASTONERA –
CAPACIDAD 3/8” - 2-3/8” DIAMETRO
NUEVA CON GARANTIAThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molde...