Identificador: 1930 Abierta

PARTE: 2CA-RM70 - BASTONERA – CAPACIDAD 3/8” - 2-3/8” DIAMETRO

AMXmachinery

Contacte al Vendedor

Descripción

PARTE: 2CA-RM70 - BASTONERA – CAPACIDAD 3/8” - 2-3/8” DIAMETRO

NUEVA CON GARANTIA

The unit is designed solely for shaping of round poles in wood working factory.
The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.
The cutting head has been proven flawless through experience and study of many years.
The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board, carbon, bakelite, bamboo and wood.
A hand wheel is provided to adjust simply the feed rollers.
Wood fragments and dust are cleared off from the unit thoroughly in coherence with spindles revolution.
Cutting of each type and size of workpiece will be carried out by specific cutter head and rollers for finished products.
Automatic feeding, one-piece cast iron base.
High-efficiency industrial TEFC motor for powerful cutting.

Design and specifications are subject to change without prior notice.

SPECIFICATIONS	2CA-RM-70	2CA-RM-150
Motor of Main Cutter	5 HP, 3 PH, 230V	15 HP, 3 PH, 230V
Feed Motor	1 HP, 3PH, 230V	2 HP, 3 PH, 230V
Cutter Speed	2900 RPM	1800 RPM
Feed Speed	20 ~ 43 FPM	20 ~ 43 FPM
Total Knife	2	4
Working Size	3/8" ~ 2-3/8"	1" ~ 5"
N.W.	770 LBS	1600 LBS
G.W.	1120 LBS	2100 LBS

Pago y Devoluciones

Forma de pago: Visa/Mastercard/American Express, Transferencia/Deposito Bancario

Publicar mensaje

Ingresar to ask the seller a question.

AMXmachinery

POSTFORMADORA

PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190Para hacer dobles para Back Splash- 110V, 1 phase, 15 amps- 220V, 1 phase, 8 amps- Air: 80 PSI - 12' maximum capacity (3660 mm)- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm) - Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)- Crated weight 1800 LBS. - Shipping dimensions 182” long X 34” wide X 50” high- Bends inside cove bends for back splashes. The 0190 is available with either...

AMXmachinery

CABEZAL LIJADOR

PARTE # 2SR-B12 – CABEZAL LIJADOR CON 1 SET DE CEPILLOS Y LIJA INSTALADONuevo con garantíaEl cabezal lijador remplaza el lijado a mano en las superficies con figura, lijando sin perder la figura original.Hecho de aluminioMedida cabezal: 5-1/4” ancho x 9” diámetro x 1” centro para flechaIncluye 15 cepillos 4” ancho y 1 set de lija instaladoLijas disponibles: grano 60, 80, 100, 120, 150, 180, 220