Identificador: 1935
Abierta
Descripción
PARTE: 2VE-VTH-35/8/2VU - ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
TRANSPORTADOR VTBRATORIO 16” LARGO
NUEVA CON GARANTIA
Application Description:
Type of material to be ground: Wood – Pine, kiln dried
Form of material to be ground: Rips from gang-rip, waste wood from cut-offs
Typical size of material to be ground: < 5” x 18” x 16’
Required volume of material to be ground: 1,000 lbs/hr
Desired screen or particle size: 3/4”
Use of ground product: Not Specified
SPECIFICATIONS
Machine Infeed Opening: 3.5” H x 14” W
Rotor Length: 14”
Rotor Diameter: 12”
Number Of Cutters: 18 (40 mm x 40 mm)
Rotor Speed: 390 rpm
Infeed Conveyor: 16’ Vibratory Conveyor
Drive Motor HP: 40
Voltage: 460V/3ph/60Hz
NOTE: A throughput rate in excess of 1,000 lbs/hr through a 3/4” screen is achievable dependent on the type of material, form of material, screen size and method of feeding.
Throughput estimates are based on maximum obtainable rates and may vary according to material types and screen sizes.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MOTORES ELECTRICOS - PARA MAQUINAS SILVERLINE
MOTORES ELECTRICOS - PARA MAQUINAS SILVERLINENUEVOS CON GARANTIAEJEMPLO:3 HP - 220V, 3 FASES, 60 HZ, 7.5 AMP, RPM 3450 - PARA CEPILLO 5 HP SILVERLINE
AMXmachinery
PARTE: 2MT-CM15 – CORTA Y AGUJERA ESQUINAS – PARA LAMINA RECONOCIMIENTOS
PARTE: 2MT-CM15 – CORTA Y AGUJERA ESQUINAS – PARA LAMINA RECONOCIMIENTOSNueva con garantia6 combinaciones:Esquina NotchEsquina RedondaAgujeros EsquinasAgujeros CentradosCombinacion agujero y notchCombinacion agujero y redonda Peso: 4 kgDimensiones: 17.25 × 11.25 × 6 pulgadasDiámetro agujero: 1/8 y 3/32 El trabajo se hace en 1 solo pasoCortes rapidos, limpios y sin rebabasRadio adjustableRapida y facil de usarPrecision en cortes repetitivos
AMXmachinery
PARTE: 4RI-OMNIA2200 - TALADRO PARA TAQUETES / PERNOS - RILESA - OMNIA 2200
PARTE:
4RI-OMNIA2200 - TALADRO PARA TAQUETES / PERNOS - RILESA - OMNIA 2200
NUEVO CON GARANTIADescription:• Drilling from 4 sides : top, right, left, back• Capacity of up to 22 pcs/min• Vertical magazine• One-man operated Extra:• Side movement• Single drop magazine• Possibility to revers items out of the machine• Can be integrated in a line of machines• Waste Conveyer Workpiece DimensionsLength:160 – 1500 mm160 – 2200 mmHeight:10 – 40 mmWidth:
...
AMXmachinery
PARTE 12429 - ESPIGADORA DOBLE DE CADENA - 136”
PARTE: 12429 - ESPIGADORA DOBLE DE CADENA - 136”
USADA - BUENAS CONDICIONESPiece
Size: 10" - 136"Number
of Heads: 8Motor: 16"Electrical
Characteristics: 480 Volts / 3 Phase / 60 CyclesEquipped
With:Complete
Electrical Controls W/Operator Control StationOverall
Dimensions: 172" L-R x 122" F-B x 68" High (est.)
Weight: 15,000 lbs. (est.)