Identificador: 230
Abierta
Descripción
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVAS
Shaper Motor: 7.5 HP Belt Driven
Shaper Spindle Speed: 4000-7000 rpm
Shaper Spindle: 1-¼" Dia.
Sander Motors: 1.5 HP Direct Drive
Sander Spindle Speed: 400-1800 rpm
Sander Spindles: 1" Dia. by 4" Tall
Voltage: 208-240V 3ph, 30A
208-240V 1ph, 40A
440V 3ph, 15A
Conveyor: 6" Wide, 4 rows of tires
Vertical Adjustment: Yes, with digital counters
Horizontal Adjustment: Yes, with digital counters
Sanding Wheel Tilt: 60º Forward; 40º Back
Fence: 5 adjustable stops
Table Height: 36 inches
Size: 75" x 36" x 54"
Weight: 1325 lbs
Plantilla Centradora para curvas - opcional
Designed and manufactured to give years of dependable service, the Larick 410 will shape and sand a wide variety of workpieces. Features include a 6" wide feed chain with four staggered rows of hold down tires; front adjusting handwheels with digital readouts for horizontal and vertical shaper and sander positions; AC inverter controlled variable speed for shaper, sanders, and feed featuring digital readouts for speed and load; floating heads are optional which allow shaping and sanding of arched panels. The user friendly design makes setup and profile changeovers quick and easy.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENCHAPADORA DE CANTOS – 220V, 2 FASES
PARTE: 2MK-CBC.T – ENCHAPADORA DE
CANTOS – 220V, 2 FASES
Nueva con garantíaFRONT/REAR TRIMMINGTOP/BOTTOM TRIMMING
BUFFING UNIT
This
machine is a master piece of engineering, packet with features that will make
your job easier giving you a product finish like never before. Super steady and
stable the CBC.T platform is a stainless steel mono-block base. All operating
units are easy to be accessed through the upper protection hood.
The
friction-free worktable feed panels ...
AMXmachinery
TORNO COPIADOR – NAVAJA TRASERA – LOBO
PARTE # 11623 – TORNO COPIADOR – NAVAJA TRASERA – LOBO En buenas condiciones de opracionProduccion 4-7 piezas por minutoMotor 7.5 HP, 220/440V, 3 fases, 60 cyLOBO CP-168A Hydraulic Copy Lathe with hopper feed with automatic chucking, square or round stock can be hopper feed.This unit is designed to produce (4 - 7) pieces a minute.Equipped with 7.5 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change and 3 HP hydraulic motor.Features:Designed for the fast, effici...
AMXmachinery
ROUTER INVERTIDO CR ONSRUD 2408
PARTE # AMX-10016 - ROUTER INVERTIDO - CR ONSRUD 2408EN MUY BUENAS CONDICIONESMARCA: CR ONSRUDMODELO: 2408MOTOR: 7.5 HP, 230V, 3 FASES, 60 HZMESA: 91 CMS FRENTE X 61 CMS FONDOGARGANTA: 61 CMSSALIDA EXTRACION: 6" DIAMETROMEDIDAS TOTALES: 95 CMS FRENTE X 135 CMS FONDO X 170 CMS ALTO
AMXmachinery
PARTE: 12535 - BASTONERA – HAWKER
PARTE: 12535 - BASTONERA
– HAWKER
USADA – BUENAS CONDICIONES
2” diámetro máximo