Identificador: 272
Abierta
.jpg)
.jpg)
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
AMXmachinery
Descripción
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
New with warranty
For mass productions, 2 to 3 minute per cycle for drying or bending the wood project
Varieties of wood bending shapes are able to produce.
Press one large part, slicing into many small pieces for high productivity.
Meet all kinds of furniture fabrications.
One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.
Using wooden mold instead of expensive steel mold to save development cost dramatically
Use electricity power instead of steam boiler, no influence to the environment without emissions of PM2.5.
High frequency wave penetrate into inside of glue, shorten glue cured period and forming time.
One work is able to operate 4 to 6 bending press machines.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
T-EDGE APPLICATOR
PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.- Standard Features:- Hammer ½ hp motor- Pneumatic corner notching- Electric cutoff ½ hp motor- 3" Dim. Saw blade 8,000 RPM- 80 PSI Required- Crated weight 600 LBS.- Shipping dimensions 53” long X 40” wide X 50” high
AMXmachinery
LIJADORA DE TAMBOR – 2 TAMBORES – CAP. ANCHO 26”
PARTE:
1SIL-DC-DS26 – LIJADORA DE TAMBOR – 2 TAMBORES – CAP. ANCHO 26”
Nueva con garantía
Rodillos 26”
Ancho Máximo De Lijado: 25-1/2"
Tipo De Empaque: 1 Caja
Peso De La Máquina: 220 kg
Motor Del Tambor De Lija: 3 HP, 220V, 60Hz, 2 fases
Motor De La Cinta De Alimentación: 1/6 HP
Altura Máxima De Lijado: 12-1/4"
Cantidad De Rodillos: 2 de 5" x 26"
Velocidad De La Cinta :
1-6mts/min
2 Tomas De Aspiración De: 4"
AMXmachinery
RODILLOS PARA MAQUINAS METAL, MADERA, ETC.
PARTE: 2WR-001 - RODILLOS PARA
MAQUINAS METAL, MADERA, ETC.
Rodillos para máquinas para metal, madera, etc.
Envíenos las medidas y especificaciones que necesita.
AMXmachinery
PEGADORA CANTO CHAPA - ESPESOR 0.35 - 1.5 mm
PARTE # 3NN-VENEERPLUSG1 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPASistema de pegamento integradoMachine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.35 ~ 1.5 mmVeneer Strip Length：min. 350 mmVeneer Strip Width：min. 45 mmProduction Speed：up to 45 m/min.Electric Power：approx. 8.8 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：1200 mmDimensions (L x W x H)：2200 x 2100 x 1600 mmNet Weight：approx. 1500 kgColor：RAL 8019 / R...