ID: 2372
Open
Description
PARTE: 12545 - LINEA DE PINTURA UV - SUPERFICI MINI PLUS
USADA - MUY BUIENAS CONDICIONES
Passline Height: 900 mm
Operating side: RH, as viewed from inlet of line, LH available as a special order.
Workpiece Dimensions (Approx.):
Min. - max. length: 300 mm - 4880 mm (12" - 16')
Min. - max. width: 25 mm - 1300 mm (1" - 51”)
Min. - max. thickness: 3 mm - 90 mm (1/8" - 3-1/2")
Max. weight: 3# per sq. ft
Speeds:
Mechanical speed: 1-3 m/min
Avg. production speed: 2 m/min
Connections:
Voltage: 480 V/ 3 Ph + Ground / 60 Hz
Standard distribution system: TN-S
Compressed air: 6 bars
Thermal connection (NOT required for sprayer – if optional dryer is
purchased, the heating coil is electric)With paper protective system for belt
conveyor.
CONVEYING SYSTEM AND PAPER
PROTECTION DEVICE
In-feed and out-feed driven roller conveyor system.
Central belt conveyor with protective paper device.
The paper function is to absorb the overspray, thus protecting the conveyor
belt underneath.
The machine is equipped with a paper roll unwinding system at the in-feed
and rewinding system at the out-feed.
GENERAL DESCRIPTION
The automatic through-feed spraying machine mod. MINI achieves the
advantages of automatic spraying process with a limited investment.
SPRAYING ARM AND LACQUER CIRCUITS
Lacquer application system consisting of a reciprocator with single arm
driven by brushless motor and sliding on a high precision linear guide.
Accurate motion guaranteed by high precision reducer.
The arm is equipped with guns holder supporting up to max four guns, with
two lacquer circuits.
To achieve a higher level of flexibility, the MINI features, as standard, the
QUICK-CHANGE system for the guns holder.
Approx size if unit is
Mini pluis sprayer is 12'
dryer is 25'
infeed table 8'
approx 45 feet long
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
BRIQUETEADORA PARA MADERA - 7.5, 10 HP
PARTE:
4GR-G2-50 - BRIQUETEADORA PARA MADERA - 7.5, 10 HP
NUEVA CON
GARANTIAVolume reduction and production of heating material Developed for chips and dusts especially. These
high-performance, robust and high-quality machines compress homogenous material
to form com-pact briquettes. Due to its highly effective hydraulic system,
their wattage is extremely low considering their briquetting output.The machine is extremely silent, requires only little room
and can be set up almost anywher...
AMXmachinery
ENLAZADORA/COLA DE MILANO
PARTE # 2CA-JDT75 - ENLAZADORA/COLA DE MILANO21500 RPM spindle rotation for an extremely fine finish on dovetail jointsHigh RPM spindle allows for precision machining of plywood & solid drawer sidesIndependent adjustment of both the tenon and the mortise depth for precise fitting of dovetail jointsDust hood for milling cutterSafety rail in front of spindle motorHigh quality pneumatics for smooth feeding, resulting in quality cuttingCast iron base to ensure vibration free cuttingAutomatic lubrica...
AMXmachinery
SIERRA TRONZADORA 18" DERECHA / IZQUIERDA
PARTE # 2NT-NTCS18L – SIERRA TRONZADORA – DISCO 18” – MOTOR 10 HP – IZQUIERDA – LEFTPARTE # 2NT-NTCS18R – SIERRA TRONZADORA – DISCO 18” – MOTOR 10 HP – DERECHA – RIGHT - OPCIONALNueva con garantiaFEATURESMax cutting capacity: 2" x 12", 3" x 11", 4" x 10"10HP motor, 3PH 230V with 24V magnetic controls18” 120T Carbide tipped blade with included1” Saw arbor diameterCycle operation: PneumaticTable size: 26” x 27.5”Quick access on front of the machine to adjust blade s...
AMXmachinery
APILADOR/ESTIBADOR ELECTRICO 1.5 TONS
PARTE # 1CM-AP-ELC4.5 - APILADOR/ESTIBADOR ELECTRICO 1.5 TONSCARACTERISTICAS:Altura máx. elevación: 4500 mm (4.50 mts)Ancho de horquillas: 1300 mmTipo: STRADDLECapacidad: 1500 Kg.Procedencia: AmericanaHombre AbordoRadio de giro: 2.90 mts Radio de giro mínimo: 2.40 mtsBateria: 24 voltsLongitud Uñas: 106 cms.Garantía: 6 meses contra defectos de fabricaciónEntrega : 1 a 3 Días (sujeto a disponibilidad)