Identificador: 1335
Abierta
LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
AMXmachinery
Descripción
PARTE: 2DO-PMC-HD – LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
Nueva con garantía
Heavy duty welded structure. They feature dust hoods on both sides, a table with steel rollers and virtually wear free balanced and quiet running aluminum pulleys. All models are equipped with a magnetic starter (overload protection) and belt guards.
Maximum Part Length:
Pressure Pad Traveling Bar: 96"
Pressure Pad Traveling Bar Contact Wheel Assembly: 80"
Table size: 30" wide X 96" long
Steel table is covered with Russian Cherry wood plywood surface
Motorized vertical table with 28" vertical adjustment
Table weight capacity: 1000 lb
One Abrasive Belt: 6" X 264", 4750 F.P.M.
Pulleys: 10" dia. X 6.25" face
Pressure Pad Traveling Bar
Hand Held Pressure Device
Magnetic starter with overload protection
Belt guards
Pneumatic tensioner
Sanding belt breaking detector
Dust collector outlet: 6" diameter @ 1200 cfm
Compressed air requirement: 90 psi
5 HP T.E.F.C. motor, 1750 rpm
Voltage: 220 or 440 / 3 / 60, 17 amps
OPTIONS
Single Phase 5 HP motor, 220 volts
Enlarge the table to 48"
Vulcanized Rubber Grooved Contact Wheel Assembly
- (for hairlining & fine graining)
Contact Wheel Assembly with Corrugated Stacked Disks
- (for weld seam removal & rough graining)
Variable speed for a 5 HP Motor:
- Allow belt speed between 3300 to 6300 ft./min.
Six (6) Vacuum cups with individual activation switch, to hold parts
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA TRONZADORA DE 45 A 90 GRADOS AJUSTABLE – DISCO 20”
PARTE:
2TA-CS- 20RL45 – SIERRA TRONZADORA DE 45 A 90 GRADOS AJUSTABLE – DISCO 20”
NUEVA
CON GARANTIA
Features:
Adjustable
maximum 45 degree to the right or left or 90 degree angle setting for
semi-automatic, fast cutting.
Semi-automatic
by pneumatic movement cutting.
Auto.
cutting cycle simply operated by foot switch.
Sealed
long-life ball bearings.
Full 10
HP motor for powerful cutting capacity.
Precision
ground cast iron table with heavy metal cabinet st...
AMXmachinery
PARTE: 10385 - ASERRADERO ESTACIONARIO - WOODMIZER - LT-300
PARTE: 10385 - ASERRADERO ESTACIONARIO - WOODMIZER - LT-300En muy buenas condiciones de operaciónManufactura 2001Motor eléctrico 30 HPCapacidad de troceria hasta 30 pulgadas diametro x 22 pies de largo Maquina en MexicoExtension para aserrar hasta 20 pies de largoRodillos hidraulicos para mover los trozos hacia adelante y hacia atras para ajustar el corteOPCIONAL:Deck para trozos - Cadena alimentadora de troceria de 10 mts de largo aproximadamente y banda de salida de las tablas.Video1: https...
AMXmachinery
SLICER - REBANADORA - 8 PIES DE LARGO
PARTE: 11761 - SLICER - REBANADORA - 8 PIES DE LARGO
8 - SLICER
(REBANADORA) PARA CORTE DE .5 MM HASTA
6MM MARCA IND. G.H. PARA CORTE DE MADRA DE 8 PIES HASTA 18 PULGADAS DE
ANCHO
AMXmachinery
PARTE: AMX-10123 - EXTRACTOR DE PARED - ASPAS 19” DIAMETRO - MOTOR ½ HP - S&P - HEP-500
PARTE: AMX-10123 - EXTRACTOR DE PARED - ASPAS
19” DIAMETRO - MOTOR ½ HP - S&P - HEP-500
USADO - BUENAS CONDICIONES
MOTOR ½ HP, 220/440V, 3 FASES
RPM 1725
VOL. 10,300 M/H
MEDIDAS: 63 CM ANCHO X 63 CM ALTO X
36 CM FONDO